Manual Marmitek DoorPhone 124 (page 11 of 100) (English, German, Dutch, French, Italian, Spanish)

494283

Zoom out

Zoom in

1/100

DOORPHONE 120™

5. INSTALLING THE DOOR UNIT

• Decide the best place for the installation of the door

unit. The attachment surface should be as flat as

possible; otherwise the unit will not fit properly onto

the wall plate.

• It is advisable not to install the unit onto a metal

surface or near other possible sources of interference,

which could have negative influence on the system.

• Mark the spots to drill holes at, by making use of

the holes in the plate, as shown in figure 4, and

attach the plate to the wall. You can use the supplied

screws and plug for the attachment of the plate.

5.1 Connecting the power supply to the door unit:

The door unit can be powered in two ways.

1. Using batteries. (power failure)

2. Using external power adapter.

1. Using batteries:

Insert 4 AA-alkaline batteries, keep in mind the right polarity + and -, in relation to the

contact springs in the battery compartment. Use only new full alkaline batteries for reliable

function (do not use rechargeable batteries).

2. Using external power adapter:

It is also possible to connect the door unit to the supplied external power. Connect the

wires of the power adaptor to the connectors (terminals) at the backside of the door unit

(5), these are marked with the

symbol. When there are also batteries present in the

door unit, then the batteries take over the function in case of power failure. Check the

condition of the batteries regularly. Replace old batteries immediately. When an external

power adapter is connected, the name illumination on the door unit will get activated

automatically when it gets dark outside.

5.2 Connecting an electric door opener (optional):

• It is necessary for the installation of the electric door opener, that the door unit will be

supplied with external power; otherwise the door-open function will not be active and

therefore not usable.

• There are different connectors (terminals) on the backside of the door unit, for the

installation of the door opener (maximum load 12V/1A). The voltage on these connectors is

the same as that of the connected power adapter.

1. A, B: 8~12V normally, 0V when triggered.

2. A, C: 0V normally, 8~12V when triggered.

Figure 4

Figure 5

Insert riverts into holes

(for concrete walls only).

Driled holes

20194_20100216_UG_Doorphone120.i11 11 12-3-2010 9:52:39

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek DoorPhone 124 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 7,14 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Marmitek DoorPhone 124 Manual

Product: