494317
11
Zoom out
Zoom in
Previous page
1/20
Next page
© MARMITEK
10
FREQENTLY ASKED QUESTIONS
What is the reason for modules to switch on/off
spontaneously?
It is possible that a Marmitek X-10 System is installed at
one of your neighbours using the same House Code. To
solve this problem try to change the House Code of your
system, or have FD10 Phase Coupler/Filter installed at your
incoming mains.
My modules will not respond to my controller.
Make sure that the House Code on all Modules and
Controllers are set to the same House Code (A .. P).
My modules will not react to my remote / sensor.
When you use a remote or sensor, you should have at least
one Transceiver, CM15Pro or Marmitek X-10 Security
Console installed in your house. These components will
translate the radio signals to the Marmitek X-10 signal on
the power line. Using several remotes and sensors, you
only need one central transceiver.
Am I able to increase the range of my remotes by
using more Transceivers?
Yes, you can use more than one Transceiver in your home
when the range of your remotes is not sufficient. The
transceiver is using
so called collision detection to prevent signals to be
disturbed when more than one transceiver is transmitting.
The Transceivers will wait for a quite power line before
transmitting their data. To prevent your Marmitek X-10
System to become slow or to prevent dimming from
becoming less smooth, make sure that the transceiver units
are placed as far away from each other as possible.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marmitek AMM32 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek AMM32 in the language / languages: English as an attachment in your email.

The manual is 0,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Marmitek AMM32

Marmitek AMM32 User Manual - Dutch - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info