494317
10
Zoom out
Zoom in
Previous page
1/20
Next page
AMM31
9
PROGRAMMING.
WARNING: DO NOT FORGET TO TURN ON THE MAIN
MASTER SWITCH PRIOR TO PROGRAMMING.
Programming the address and the optional function All
Lights On: The factory setting for the AMM31 is to address
A1 and no response to the optional function All Lights On.
Unlike most Marmitek X-10 Modules the AMM31 does not
have code wheels.
To change the address and the optional setting for the All
Lights On function, the module needs to be set to the
program mode.
Press and hold the “Program” button for 5 seconds,
indicator light turns ON, means entering “Program mode”.
(If your load is a lamp, use your controller to transmit the
“All Lights On” command, the Micro Module will then
respond to “All lights On”, while if the load is an
appliance, you should transmit the “All Units Off”
command, the Micro Module will then not respond to “All
lights On” commands.) Transmit the address command for
the first address of the module, followed by the address
command for the second address, at this time the indicator
light goes OFF.
Warning! The MicroModule will leave the setup mode if it
doesn’t receive any commands within 8 seconds.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marmitek AMM32 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek AMM32 in the language / languages: English as an attachment in your email.

The manual is 0,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Marmitek AMM32

Marmitek AMM32 User Manual - Dutch - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info