807594
7
Zoom out
Zoom in
Previous page
1/14
Next page
7
CAUTION
When the vehicle stands for a long time, the battery
may discharge.
6.5 REPLACING A DEFECTIVE FUSE
Unscrew the housing of the fuse holder in the plus cable. Replace the
defective fuse with a new, fuse of the same type F 200 mA, L, 250V.
Screw the fuse holder back together again.
Do not dispose of electrical devices with the household
waste! Electrical and electronic scrap must be collected se-
parately and disposed of in an environmentally responsible
manner for recycling. Please contact your community or city
administration regarding disposal options for electrical and
electronic scrap.
9. CONTACT INFORMATION
EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal, Germany
+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160
info@eal-vertrieb.com
www.eal-vertrieb.com
Figure 7: Replace fuse
8. NOTES REGARDING ENVIRONMENTAL PROTECTIONReconnect the battery and check that the terminals are tight. The marten
repellent is now in operation. The operating indicator light (position 2 in
the overview) lights up red, the high-voltage indicator light (position 1 in
the overview) lights up yellow at intervals.
CAUTION
High voltage is now applied to the contact plates.
Ultrasound cannot be perceived by humans. Use the indicator
light as a guide when checking the function.
Make sure that the installation of the marten repellent ultrasonic does not
interfere with any other functions of the vehicle.
7. MAINTENANCE AND CARE
Check that the marten repellent is switched o when the ignition is
switched on, the indicator lights go out.
6.6 MEASURES FOR MAINTENANCE AND REPAIR OF THE VEHICLE
Switch o the Marder repellent unit by removing the fuse (see section 6.5)
before starting maintenance or repair work.
Inform the workshop about the installation of the marten
repellent device.
Touching the contact plates with a damp cloth will cause an
electric shock when the unit is switched on.
Therefore, switch o the marten repellent device by Remove
the fuse (see section 6.5) before starting work.
7. 1 MAINTENANCE
The marten repellent itself is maintenance-free when used as intended.
Regularly check the device, the high-voltage cables and the contact plates
for rm and correct t.
7. 2 CARE
Keep the bare surfaces of the contact plates clean.
Use a soft, maximally damp cloth for this purpose. Do not use any sharp
cleaners or cleaners containing solvents. The frequency of cleaning
depends on the weather, season and road surface. the road surface.
Replace the fuse after completing the work.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marder schreck 16277 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marder schreck 16277 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3.02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info