62166
61
Zoom out
Zoom in
Previous page
1/94
Next page
58
ENGLISH
NIGHT MODE
Useful at night or when loud noise is undesirable,
this mode compresses the dynamic range, making
it easier to hear quieter audio content without
increasing the overall volume.
Note that the effect of night mode is determined
by the Dolby Digital content. Night mode may have
no effect with content that does not support this
function.
AMP
AUX2
AUX1
TAPE
TUNER
CD
CD-R
MD
12
LIGHT
Learning Remote Controller
RC8001SR
AMP
D4
D5
D2
M
D1
D3
D5
VOL
CH
LEARN
NAME
MACRO
USE
PAGE
123
4
1.
To select this mode, press the AMP button on
the remote controller, and then press the >
button until PAGE3 is displayed.
2.
Each time the NIGHT (D1) button is pressed,
the mode changes according to the following
options indicated on the front of the unit.
• AUTO Mode
NIGHT AUTO
AUTO mode is available when decording Dolby
TrueHD signals.
When night mode is activated, “NIGHT” is
illuminated on the front of the unit. (See page 9)
NIGHT Mode ON
NIGHT ON
Setting the Night mode to “ON” compresses the
dynamic range in Dolby Digital only.
NIGHT Mode OFF
NIGHT OFF
Turn off the Night mode.
ADJUSTING THE MAIN VOLUME
DIGITAL
RLVIDEO
S-VIDEO
AUX 1 INPUT
AUDIO
VOLUME
UP
DOWN
M-DAX A/B
T-MODE
MEMORY CLEAR
DISPLAY
EXIT
SPEAKERS
BAND
MIC
L
C
R
SL S SR
LFE
DIGITAL
SURROUND
G
HT
E
AK ANALOG
DIGITAL
ATT
EQ
PCM
AAC
2 31
OK
VOL
CH
PREV
MUTE
MENU
EXIT
GUIDE
TEST
CH.SEL
LIP.SYNC
SURR
7.1CH
ATT
SPK-AB
VOL
Adjust the volume to a comfortable level using
the VOLUME control knob on the front panel or
VOLUME 3 / 4 buttons on the remote controller.
To increase the volume, turn the VOLUME knob
clockwise or press VOLUME 3 button on the remote,
to decrease the volume, turn counterclockwise or
press VOLUME 4 button on the remote controller.
Notes:
The volume can be adjusted within the range of –
to 18 dB, in steps of 1 dB.
However, when the channel level is set as described on
page 51, if the volume for any channel is set at +1 dB
or greater, the volume cannot be adjusted up to 18 dB.
(In this case the maximum volume adjustment range
is “18 dB - Maximum value of channel level)
SELECTING THE SURROUND MODE
Example: AUTO SURROUND
STANDBY
PHONES
INPUT SELECTOR
AV SURROUND RECEIVER SR8002
MENU
PURE DIRECT THX
7.1CH INPUT
MODE AUTO
MULTI
PURE DIRECT
SURROUND
SPEA
K
MU
L
DSD
POWER ON/OFF
DISP MULTI AUTO TUNED
SLEEP
SURR DIRECT
AUTO
AMP
AUX2
AUX1
TAPE
TUNER
CD
CD-R
MD
12
LIGHT
Learning Remote Controller
RC8001SR
AMP
5 64
8
0
97
MEMO
CLEAR
7
.
1CH
ATT
SPK
-
AB
DISP
OSD
SLEEP
D4
D5
D2
M
D3
D5
VOL
CH
D1
LEARN
NAME
USE
PAGE
123
4
(Using the unit)
To select the Auto surround mode during playback,
press the AUTO button on the front panel.
(Using the remote controller)
To select the Auto surround mode, press the
AMP button and press the > button until PAGE1 is
displayed. Press the AUTO (D1) button.
For surround modes, see “Surround Mode” on
page 60.
To add the THX mode to the Auto Surround mode,
press either the THX button on the unit or the THX
button on the remote controller.
To select a specifi c surround mode, Press the
individual surround mode button on page 1.2 on
the remote controller.
DIALOGUE NORMALIZATION MESSAGE
Dialogue Normalization (Dial Norm) is a feature of
Dolby Digital.
When playing back software which has been encoded
in Dolby Digital, sometimes you may see a brief
message on the FL display which will read "D-NORM
X dB" (X being a numeric value).
Dialogue Normalization serves to let you know if the
source material has been recorded at a higher or
lower level than usual. For example, if you see the
following message: "D-NORM + 4 dB" on the FL
display, to keep the overall output level constant just
turn down the volume control by 4 dB. In other words,
the source material that you are listening to has been
recorded 4 dB louder than usual.
If you do not see a message on the FL display, then
no adjustment of the volume control is necessary.
BASIC OPERATION
(PLAY BACK)
SELECTING AN INPUT SOURCE
Before you can listen to any input media, you must
rst select the input source on the unit.
Example : DVD
DSS
AMP
AUX2
AUX1
TAPE
TUNER
CD
CD-R
MD
VCRDVD
TV
12
LIGHT
Learning Remote Controller
RC8001SR
DVD
STANDBY
PHONES
INPUT SELECTOR
AV SURROUND RECEIVER SR8002
MENU
PURE DIRECT THX
7.1CH INPUT
MODE AUTO
MULTI
PURE DIRECT
SURROUND
SPE
A
MU
L
DSD
POWER ON/OFF
DISP MULTI AUTO TUNE
D
SLEEP
SURR DIRECT
AUTO
To select DVD, turn the INPUT SELECTOR knob
on the front panel or press the DVD button on the
remote controller two times in a row. After you have
selected DVD, simply turn on the DVD player and
play the DVD.
As the input source is changed, the new input
name will appear momentarily an OSD information
on the video display. The input name will also
appear in the display, on the front-panel.
If you use the FUNCTION RENAME feature (see
page 44) , the renamed name appears on the
display.
As the input is changed, this unit will automatically
switch to the digital input, surround mode,
attenuation, and night mode status which were
entered during the confi guration process for that
source.
When a video source is selected, the selected
video signal is output from the MONITOR OUT
terminal.
SR7002-8002_U_01_ENG 3_3.indd 58SR7002-8002_U_01_ENG 3_3.indd 58 07.8.24 1:15:58 PM07.8.24 1:15:58 PM
61


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz SR7002 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz SR7002 in the language / languages: English as an attachment in your email.

The manual is 15,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Marantz SR7002

Marantz SR7002 User Manual - Dutch - 74 pages

Marantz SR7002 User Manual - French - 84 pages

Marantz SR7002 User Manual - Spanish - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info