522801
31
Zoom out
Zoom in
Previous page
1/96
Next page
NAMES AND
FUNCTIONS
29
BASIC
CONNECTIONS
BASIC
OPERATION
ADVANCED
CONNECTIONS
SETUP
ADVANCED
OPERATION
TROUBLESHOOTING
OTHERS SETUP
ENGLISH
8. Repeat step 7 until measuring up to 6 points
measuring the main listening position
and other positions where people will
commonly listen.
When all measurements end, the following
GUI appears on the display.
Audyssey MultEQ Setup
Calculate
: : Enter : OK Exit : Exit
Speaker Check : OK
Select Calculate” with the 3/4 cursor
buttons and press the ENTER button to
calculate measurement results. During
calculations, the following GUI appears on
the display.
Audyssey MultEQ Setup
--------------
Now Calculating!
: : Enter : Exit :
Notes
• Fewer than 6 positions may be measured, but it
is recommended to measure in all 6 positions for
best results. Measuring in fewer than 3 position
is not recommended as it does not provide enough
acoustical information for good correction.
The time needed to complete calculations
depends on the number of connected speakers and
measured listening positions. The more speakers
and listening positions, the more time is needed.
9. Checking Measurement Results
When calculations for the measurement
results end, a screen appears for confi rming
the calculation results.
Check Result
Speakers Configuration
Speakers Size
Speakers Distance
Channel Level
Crossover Frequency
Store
: Up / Down : Enter : Select Exit : Exit
Select items to check with the 3/4 cursor
buttons and press the ENTER button to
enter them.
Note
To check equalizer (MultEQ
®
) parameters, see
page 38.
[Example]
Confi rmation screen for speaker detection
Speakers Configuration
Check Speaker Results
Front Left
Front Height Left
Center
Front Height Right
Front Right
Surround Right
Surround Back
Surround Left
Subwoofer
Return
: : Enter : Return
: Yes
: No
: No
: No
: Yes
: Yes
: No
: Yes
: Yes
Exit : Exit
[Example]
Confi rmation screen for speaker size.
Speakers Size
Front Left
Front Height Left
Center
Front Height Right
Front Right
Surround Right
Surround Back Right
Surround Back Left
Surround Left
Return
: : Enter : Return
: Auto
: Auto
: Auto
: Auto
: Auto
: Auto
: Auto
: Auto
: Auto
Exit : Exit
[Example]
Confi rmation screen for the distance from speakers
to the listening position
Speakers Distance
Unit
Front Left
Front Height Left
Center
Front Height Right
Front Right
Surround Right
Surround Back Right
Surround Back Left
Surround Left
Subwoofer
Return
: Up / Down : Enter : Return
: Meters
: 30.0 ft
: 30.0 ft
: 19.3 ft
: 29.6 ft
: 29.6 ft
: 21.5 ft
: 12.3 ft
: 11.6 ft
: 16.3 ft
: 12.5 ft
Exit : Exit
*
The units can be changed by moving the cursor
to Meters of Unit and pressing 1 / 2 the cursor
buttons. Each time a 1 / 2 cursor button is pressed,
the units alternate between Feet and Meters.
Note
This system cannot measure a distance of 9.15 m
(30.0 ft) or higher. In this case, >9.15 m (>30.0 ft)
is displayed.
[Example]
Confi rmation screen for channel level.
Channel Level
Front Left
Front Height Left
Center
Front Height Right
Front Right
Surround Right
Surround Back Right
Surround Back Left
Surround Left
Subwoofer
Return
: : Enter : Return Exit : Exit
: 0.0dB
: 0.0dB
: -6.5dB
: 0.0dB
: -1.5dB
: +1.0dB
: +9.5dB
: +12.0dB
: -2.5dB
: -12.5dB
[Example]
Confi rmation screen for crossover frequency.
Crossover Frequency
Front
Front Height
Center
Surround
Surround Back
Return
: : Enter : Return
: Auto
: Auto
: Auto
: Auto
: Auto
Exit : Exit
* Auto is displayed to indicate that the speaker
size and crossover frequency results were
automatically measured.
10. Storing Measurement Results in Memory
Once nished confi rming the measurement
results, select “Return” with the 3/4 cursor
buttons and press the ENTER button to
display the Check Result screen.
Check Result
Speakers Configuration
Speakers Size
Speakers Distance
Channel Level
Crossover Frequency
Store
: Up / Down : Enter : OK Exit : Exit
Place the cursor on “Store” and press
the ENTER button to store all parameters
including the equalizer parameters in memory.
If not wanting to store the calculation results
in memory, press the Exit button.
Note
Pressing “Exit” prior to pressing “Store” erases
all measurement results and calculation results,
therefore operate the remote controller with care.
When storing operations end, the following GUI
appears on the display.
Speaker Setup
Auto Setup
Manual Setup
Return
: Up / Down : Enter : Select Exit : Exit
Note
Do not turn the power to the unit off while storing
parameters in memory. This may erase or corrupt
data in the unitʼs memory and may damage the unit.
SETUP
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz SR5004 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz SR5004 in the language / languages: English as an attachment in your email.

The manual is 21,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info