6574
29
Zoom out
Zoom in
Previous page
1/36
Next page
26
ENGLISH
BASIC OPERATION
(TUNER)
LISTENING TO THE TUNER
Frequency scan step for AM is selectable.
Default setup is 10 kHz step, if your countrys
standard is 9 kHz step, Press TUNER button on
the remote more than 6 seconds. Scan step will
change.
Note:
Preset memory for the tuner will clear by changing
this setup.
AUTO TUNING
(Using the SR5400)
1.
To select tuner and desired band (FM or AM),
press the TUNER button on the front panel.
2.
F/P button on the front panel to display the
frequency.
3.
Press the TUNING or button on the front
panel for more than 1 second to start the Auto
tuning function.
4.
Automatic searching begins then stops when
a station is tuned in.
(Using the remote control unit)
1.
To select tuner and desired band (FM or AM),
press the TUNER button twice within in two
seconds on the remote.
2.
Press the
55
55
5 or
66
66
6
for more than 1 second on
the remote.
3.
Automatic searching begins then stops when
a station is tuned in.
If tuning does not stop at the desired station, use
to the Manual tuning operation.
MANUAL TUNING
(Using the SR5400)
1.
To select tuner and desired band (FM or AM),
press the TUNER button on the front panel
2.
Press the F/P (Frequency/Preset) button on
front panel, to have the frequency appear on
the display.
3.
Press the TUNING or buttons.
(Using the remote control unit)
1.
To select tuner and desired band (FM or AM),
press the TUNER button twice within in two
seconds on the remote.
2.
Press the
55
55
5 or
66
66
6 on the remote to tune in the
desired station.
DIRECT FREQUENCY CALL
1.
To select tuner and desired band (FM or AM),
press the TUNER button twice within two
seconds on the remote.
2.
Press the F.DIR on the remote, display will
show FREQ - - - -.
3.
Input your desired stations frequency with the
ten numbered keypad on the remote.
4.
The desired station will automatically be tuned.
DOWN
MEMORY
TUNING
MODE
R
MUTE
S-VID
DSS/VCR2
AUX
VCR1
DVD
CD
CD-R
TAPE
TUNER
S-DIRECT DISPLAY
A/D6.1CH INPUTFF
F/P
3. 2. 1.
DOWN
MEMORY
TUNING
MODE
R
MUTE
S-VI
DSS/VCR2
AUX
VCR1
DVD
CD
CD-R
TAPE
TUNER
S-DIRECT DISPLAY
A/D6.1CH INPUTFF
F/P
3. 2. 1.
(FM) TUNING MODE (AUTO STEREO OR MONO)
When in the auto stereo mode, AUTO indicator will
be illuminated on the display.
The ST indicator is illuminated when a stereo
broadcast is tuned in.
At open frequencies, the noise is muted and the
TUNED and ST indicators are not illuminated.
If the signal is weak, it may be difficult to tune into
the station in stereo. In such a case, press the
MODE button on the front panel or press the MODE
button on the remote.
AUTO indicator is not illuminated, if FM stereo
broadcasts are received in monaural and the ST
indicator is not illuminated.
To return to auto stereo mode, press the MODE
button or press MODE button on the remote again.
AUTO indicator is illuminated on the display.
PRESET MEMORY
With this unit you can preset up to 50 FM/AM
stations in any order.
For each station, you can memorize the frequency
and reception mode if desired.
AUTO PRESET MEMORY
This function automatically scans the FM and AM
band and enters all stations with proper signal
strength into the memory.
UP
VOLUME
DOWN
G
MODE
MUTE
AUX INPUT
S-VIDEO VIDEO L AUDIO R
ATT
CD
CD-R
TAPE
TUNER
S-DIRECT DISPLAY
F/P
AV SURROUND RECEIVER SR5400
UP
SELECTOR
VOLUME
DOWN
MEMORY
TUNING
MODE
CLEAR
MUTE
POWER ON/STANDBY
PHONES
ENTER
STANDBY
AUX INPUT
S-VIDEO VIDEO L AUDIO R
ATT
SELECT
DSS/VCR2
AUX
VCR1
DVD
TV
CD
CD-R
TAPE
TUNER
S-DIRECT DISPLAY
A/D6.1CH INPUTVIDEO OFF
F/P
2.4.2.5. 1. 3.
1.
To select FM , press the TUNER button on the
front panel.
2.
While pressing the MEMORY button, press
the TUNING button up.
AUTO PRESET will appear on the display,
and scanning starts from the lowest frequency.
3.
Each time the tuner finds a station, scanning
will pause and the station will be played for
five seconds.
During this time, the following operations are
possible.
The band can be changed by the TUNER button.
4.
If no button is pressed during this period, the
current station is memorized in location Preset
02.
If you wish to skip the current station, press the
TUNING button during this period, this station
is skipped and auto presetting continues.
5.
Operation stops automatically when all 50
preset memory positions are filled or when
auto scanning attains the highest end of all
bands. If you desire to stop the auto preset
memory at anytime, press the CLEAR button.
MANUAL PRESET MEMORY
(Using the SR5400)
1.
Tune into the radio station you desire (Refer to
the MANUAL TUNING or AUTO TUNING
section).
2.
Press the MEMORY button on the front panel.
(preset number) starts blinking on the
display.
3.
Select the preset number by pressing the
TUNING or button, while this is still
blinking (approx. 5 seconds)
4.
Press the MEMORY button again to enter.
The display stops blinking.
The station is now stored in the specified
preset memory location.
RECEIVER SR5400
MEMORY
TUNING
M
CLEAR
S
DSS/VCR2
AUX
VCR1
DVD
TV
CD
CD-R
TAPE
S-DIRECT D
A/D6.1CH INPUTVIDEO OFF
F/P
2. 4. 3.
PTY
ATT.
F.DIRECT
DISP./RDS
TUNE/SEARCH
MODE
TREBLE
CHANNEL/SKIP
BASS
A/D
P.SCAN
MEMO
CLEAR
0
+/A
/VCR
/ANT
/B
2.
SLEEP
MUTE
AMPAUX
TUNER
CD
TAPE
CDR/MD
DVD
VCR1
DSS/VCR2
TV
VOL.VOL.
TV MAIN
1.
PTY
ATT.
F.DIRECT
DISP./RDS
TUNE/SEARCH
MODE
TREBLE
CHANNEL/SKIP
BASS
A/D
P.SCAN
MEMO
CLEAR
0
+/A
/VCR
/ANT
/B
2.
SLEEP
MUTE
AMPAUX
TUNER
CD
TAPE
CDR/MD
DVD
VCR1
DSS/VCR2
TV
VOL.VOL.
TV MAIN
1.
MENU
OSD
SLEEP
MUTE
AMPAUX
TUNER
CD
TAPE
CDR/MD
DVD
POWER
VCR1
DSS/VCR2
TV
VOL.VOL.
TV
1.
DISC/DECK
PTY
ATT.
F.DIRECT
DISP./RDS
TUNE/SEARCH
MODE
TREBLE
CHANNEL/SKIP
BASS
A/D
P.SCAN
6.1CH IN
STEREO
M-CH ST
MEMO
CLEAR
DISPLAY
NIGHT
CSII EX/ES DSP
DTS
S-DIRECT
AUTO
321
654
98
0
7
SYSTEM REMOTE CONTROLLER
+/A
/VCR
/ANT
/B
3.
2.
DISC/DECK
PTY
ATT.
F.DIRECT
DISP./RDS
MODE
SYSTEM REMOTE CONTROLLER
RC5400SR
+/A
/VCR
/ANT
/B
F.DIRECT
DISP./RDS
TUNE/SEARCH
MODE
TREBLE
CHANNEL/SKIP
BASS
A/D
P.SCAN
6.1CH IN
STEREO
M-CH ST
MEMO
CLEAR
DISPLAY
NIGHT
CSII EX/ES DSP
DTS
S-DIRECT
AUTO
321
654
98
0
7
T.TONE
MENU OFF
SETUP/
OK
3.
2.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz SR-5400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz SR-5400 in the language / languages: English as an attachment in your email.

The manual is 2,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info