6574
28
Zoom out
Zoom in
Previous page
1/36
Next page
25
ENGLISH
ENGLISH
6.1 CH INPUT.
The SR5400 is equipped for future expansion
through the use of Multi channel SACD
multichannel player or DVD-Audio player.
When this is selected, the input signals connected
to the L(front left), R (front right), CENTER, SL
(surround left), SR (surround right) and SB
(surround back) channels of the 6.1 CH. In jacks
are output directly to the front (left and right),
center, surround (left and right) and surround back
speaker systems as well as the pre-out jacks
without passing through the surround circuitry.
In addition, the signal input to the SW (subwoofer)
jack is output to the PRE OUT SW (subwoofer)
jack.
When 6.1 CH. INPUT is selected, the last video
input used remains routed to the Monitor Outputs.
This permits simultaneous viewing with video
sources.
1.
Select a desired Video source to decide the
routed video signal to the Monitor Outputs .
2.
Press the 6.1 CH INPUT button on the front
panel or press 6.1 CH IN on the remote to
switch the 6.1 channel input.
3.
If it is necessary to adjust the output level of
each channel, use 6.1 Ch. INPUT LEVEL in
the OSD menu system as desired.
Adjust the speaker output levels so that you
can hear the same sound level from each
speaker at the listening position. For the front
left, front right, center, surround left, surround
right and surround back speakers, the output
levels can be adjusted between 10 to +10 dB.
The subwoofer can be adjusted between 15
and +10 dB.
These adjustments result will be stored to 6.1
Ch. INPUT memory. (see to page 19)
4.
Adjust the main volume with the MAIN VOLUME
knob or the VOL buttons on the remote.
RECORDING AN ANALOG SOURCE
In normal operation, the audio or video source
selected for listening through the SR5400 is sent to
the record outputs.
This means that any program you are watching or
listening to may be recorded simply by placing
machines connected to the outputs for TAPE OUT,
CD-R/MD OUT, VCR1 OUT, and DSS/VCR2 OUT
in the record mode.
To record the input source signal you are currently
watching or listening to
1.
Select the input source to record by pressing
the corresponding input selector button.
The input source is now selected and you may
watch or listen to it as desired.
2.
The currently selected input source signal is
output to the TAPE OUT , CD-R/MD OUT,
VCR1 OUT, and DSS/VCR2 OUT outputs for
recording.
3.
Start recording to the recording component as
desired.
Recording the video from one source and the
audio from another
You can add the sound from one source to the
video of another source to make your own video
recordings.
Below is an example of recording the sound from a
compact disc player connected to CD IN and the
video from a video camera connected to AUX IN to
video cassette recorder connected to the VCR1
OUT jack.
1.
Press the AUX input source button to set
video output.
2.
Press the CD input source button to set audio
output.
3.
Now CD has been selected as the audio
input source and AUX as the video input
source.
Notes:
If you change the input source during recording,
you will record the signals from the newly
selected input source.
You cannot record the surround effects.
Digital input signals are only output to the digital
outputs. There is no conversion from digital to
analog .
When connecting CD players and other digital
components, do not connect only the digital
terminals, but the analog ones as well.
400
MEMORY
TUNING
MODE
CLEAR
DSS/VCR2
AUX
VCR1
DVD
TV
CD
CD-R
TAPE
TUNER
S-DIRECT DISPLAY
A/D6.1CH INPUTVIDEO OFF
F/P
1. 2.
V SURROUND RECEIVER SR5400
MEMORY
TUNINGCLEAR
PHONES
ENTER
DSS/VCR2
AUX
VCR1
DVD
TV
CD-R
TAPE
S-DIRECT
A/D6.1CH INPUTVIDEO OFF
F/P
2.
OUND RECEIVER SR5400
MEMORY
TUNING
MODE
CLEAR
HONES
NTER
DSS/VCR2
AUX
VCR1
DVD
TV
CD
CD-R
TAPE
TUNER
S-DIRECT DISPLAY
A/D6.1CH INPUTVIDEO OFF
F/P
1.
MENU
OSD
SLEEP
MUTE
AMPAUX
TUNER
CD
TAPE
CDR/MD
DVD
POWER
VCR1
DSS/VCR2
TV
VOL.VOL.
TV
1.
MAIN
MENU
OSD
SLEEP
MUTE
AMPAUX
TUNER
CD
TAPE
CDR/MD
DVD
VCR1
DSS/VCR2
TV
VOL.VOL.
TV MAIN
2.
1.
To cancel the 6.1 Ch. INPUT setting, press the 6.1
CH INPUT button on the front panel or press 6.1
CH IN on the remote.
Notes:
When the 6.1 Ch. Input is in use, you may not
select a surround mode, as the external decoder
determines processing.
In addition, there is no signal at the record outputs
when the 6.1 Ch. Input is in use.
PTY
ATT
F.DIRECT
DISP./RDS
TUNE/SEARCH
MODE
TREBLE
CHANNEL/SKIP
BASS
A/D
P.SCAN
6.1CH IN
STEREO
M-CH ST
MEMO
CLEAR
DISPLAY
NIGHT
CSII EX/ES DSP
DTS
S-DIRECT
AUTO
321
654
98
0
7
T.TONE
MENU OFF
SETUP/
/A
/VCR
/ANT
/B
2.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz SR-5400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz SR-5400 in the language / languages: English as an attachment in your email.

The manual is 2,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info