37771
10
Zoom out
Zoom in
Previous page
1/19
Next page
6
ENGLISH
REAR PANEL
A
ANALOG OUTPUTS UNBALANCED connectors
These are the unbalanced output jacks of the analog
audio signals. The supplied analog connection cord
can be connected to the CD, AUX, or other
connectors on an amplifier. Be sure to connect the L
and R channels correctly to the corresponding jacks.
* Never connect to the PHONO connector on the
amplifier.
B
ANALOG OUTPUTS BALANCED connectors
These are the balanced output jacks of the analog
audio signals. A balanced connection cord (available
commercially) can be connected to the balanced
input jack of the amplifier. Be sure to connect the L
and R channels correctly to the corresponding jack.
(See page 13)
* If connecting the balanced output jacks, be sure to
leave the unbalanced jacks unconnected. (The
balanced and unbalanced connectors cannot be
used at the same time.)
C
DIGITAL AUDIO OUT COAX.
It outputs the playing Audio CD signal in digital format.
This jack is to be connected with a recording device,
amplifier, D/A converter, etc that has coaxial digital
input using an optional coaxial digital cable.
* Nothing is output when digital output is set to off.
* No signal will be output when a Super Audio CD is
played.
D
DIGITAL AUDIO OUT OPT.
It outputs the playing Audio CD signal in digital format.
This jack is to be connected with a recording device,
amplifier, D/A converter, etc that has optical digital
input using an optional square type optical digital
cable.
* Nothing is output when digital output is set to off.
* No signal will be output when a Super Audio CD is
played.
E
REMOTE CONTROL IN, OUT (input and
output) connectors
When the remote control connectors on the player
and on a Marantz AV component are connected using
the accessory remote control connecting cables, the
components can be operated as a system by remote
control.
When connecting to a component which is
equipped with remote control connectors, the
players REMOTE CONTROL IN connector must
always be connected to the REMOTE CONTROL
OUT connector on the other component to be
connected.
When connecting a component which is not
equipped with an infrared remote sensor, this
component must always be connected to the
players REMOTE CONTROL OUT connector.
F
EXT./INT. (Ext./Internal switch)
When this unit is used as a standalone component,
set this switch to the INT. side. When it is used
connected to external component by a remote
connecting cable and to audio component with a
remote sensor that supports remote controls by
Maranz, set this switch to the EXT. side.
* If the unit is used as standalone and the switch
is set to EXT. position, remote control unit
cannot be used.
G
AC POWER INPUT JACK
Connect the supplied power cord to this jack and a
household AC power outlet.
SA-11S1N(ENG) 04.8.3, 4:42 AMPage 6 Adobe PageMaker 6.5J/PPC
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz SA11S1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz SA11S1 in the language / languages: English as an attachment in your email.

The manual is 0,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info