122566
30
Zoom out
Zoom in
Previous page
1/36
Next page
User Guide
28
General Problems
The display stays blank or becomes black
Make sure the batteries are properly installed.
See “The Batteries” on page 3.
Press the Backlight button to make sure RC3200 and the back-
light are turned on.
See ‘Turning on the Display and the Backlight’ on p. 6.
Adjust the contrast using the Backlight button and the Page Up or
Page Down buttons on the left side of RC3200. See ‘Changing the
LCD Contrast’ on p. 7.
The display is too light or too dark
Adjust the contrast using the Backlight button and the Page Up or
Page Down buttons on the left side of RC3200. See ‘Changing the
LCD Contrast’ on p. 7.
RC3200 shuts off automatically
This is a timeout feature of the RC3200 to save power. You can
change the time RC3200 stays on in the Settings. See ‘Adjust the
LCD Timeout’ on p. 12.
Devices do not respond to commands from RC3200
Make sure RC3200 is in Use mode. See ‘Working with Modes’ on
p. 10.
Make sure RC3200’s sending LED is pointed towards the device
you’re operating.
Check if the battery level is low. If so, replace the batteries. See
‘The Batteries’ on page 3.
Check that you have correctly learned the IR commands.
See ‘Tricks for Remote Controls that are “Difficult”’ on p. 17
If the button is programmed with a macro, and all other buttons
are working correctly, reprogram the macro. See ‘Recording
Macros’ on p. 21.
RC3200 does not learn commands from an existing remote
control.
Do not learn commands directly under fluorescent lights.
Do not learn commands on a reflecting table surface.
Check if the battery level is low. If so, replace the batteries.
See ‘Tricks for Remote Controls that are “Difficult” ’ on p. 18.
After exhausting all previous suggestions, still cannot learn
one more IR command.
Check if there is sufficient memory to learn commands (more than
1% free memory). If not, revert the RC3200. See ‘RC3200
Information’ and ‘Revert’ on p. 14.
Troubleshooting
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz rc 3200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz rc 3200 in the language / languages: English as an attachment in your email.

The manual is 0,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info