522805

Marantz PS17 Manual

37
Zoom out
Zoom in
Previous page
1/44
Next page
27
ENGLISH
PROGRAMMING MACROS
Macros make it possible to use a single function button to perform
more complex series of operations that would normally require
pressing several buttons. A single button can be programmed to
perform up to 10 steps in sequence. A typical example of such a
series might be as follows:
• Turn the main amplifier power ON fi Switch the function to LD fi
Set the Surround Mode to Pro Logic fi Switch the TV to video input
fi Set the laser disc player to PLAY.
• No signals may be transmitted during macro programming.
• The various steps that make up a macro are set initially to be sent
one after another in 1 second intervals, however these intervals
may be shortened to as little as 0.5 seconds or lengthened to as
much as 5 seconds using the Setup mode.
• In the macro mode, the number of steps the macro contains is
displayed on LCD c. Macros may be programmed for each of the
11 function buttons, from LD to AMP.
1. Use a ballpoint pen or other sharp point to press the MACRO
button x until the MACRO and LEARN indicators are displayed
blinking on the LCD.
2. Press the Function button , for which you wish to program a
series of operations. In this case, let’s use the example of the
laser disc player.
Press the LD Function button ,. The LCD a will display LD-M.
Characters displayed on LCD a include the following,
depending on the function button for which the macro is being
programmed:
LD-M, DVD-M, TV-M, DSS-M, VCR-M, AUX-M, TUN-M, CD-M, TP-
M, AMP-M, CDR-M (or MD-M for remote controller set for MD).
• If a macro has already been set for the selected function
button, the LCD a will blink. Also, the number of steps in the
macro is displayed on LCD c.
3. Erasing Jog Dial Codes
To clear all codes and names previously set for each of the
functions (LD, TV, etc.).
1) Press the function you want to erase.
2)Hold down the CLEAR button ⁄5 and press both ENT
buttons m at the same time. LCD b will display CLR?.
3) If you wish to continue the clearing operation, press the OK
Cursor button ⁄0. This will return all 10 commands in the Jog
Dial to their factory presets, or leave them empty if no factory-
presets are available. Accordingly, the LCD b will return to
the factory preset displays, or will simply be empty.
• Use a similar operation to erase the Jog Dial codes for each
function.
• To cancel the memory clearing operation, do not press OK
Cursor button ⁄0 and simply touch any other button.
4. Erasing Code s by Function
To clear all codes and names previously set for each of the
functions (LD, TV, etc.), press and hold the CLEAR button ⁄5,
then press the button for the function to be cleared twice. CLR?
will appear on LCD b. If you wish to continue the clearing
operation, press the OK Cursor button ⁄0.
This will return the button to its factory-presets or leave it empty if
no factory presets are available. Accordingly, the LCD b will
return to the factory preset displays, or will simply be empty.
• To cancel the memory clearing operation, do not press the
OKCursor button ⁄0 and simply touch any other button.
• The codes for the < • 3 button ⁄1 cannot be cleared.
MEMO
GUIDE
MUTE
CH
VOL
1
2
3
4
5
CD
DVD
CD-R/MD
DSS T V VCR
TUNER
TAPE
PHONO
AUTO
SRS
6.1
5ch-ST.
Dolby H
P-DIRE.
2CH OSD SLEEP
AMP
OK
2
LD
ENT
ENT
CLEAR
CH
VOL
CD
DVD
CD-R/MD
OK
MEMO
GUIDE
MUTE
1
2
3
4
5
CD
DVD
CD-R/MD
DSS T V VCR
TUNER
TAPE
PHONO
AUTO
SRS
6.1
5ch-ST.
Dolby H
P-DIRE.
2CH OSD SLEEP
AMP
2
LD
CLEAR
ON
OFF
ON / OFF
SOURCE
MACRO
MODE
LEARNING REMOTE
CONTROL RC-17PS
POWER
… 37 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz PS17 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz PS17 in the language / languages: English as an attachment in your email.

The manual is 1,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info