522805

Marantz PS17 Manual

36
Zoom out
Zoom in
Previous page
1/44
Next page
26
ENGLISH
7. Follow the same procedure to enter “D-A”. When finished, press
the OK Cursor button ⁄0. Pressing OK permanently fixes the
newly written characters.
• Up to 5 alphanumeric characters may be entered in the
Command Name indicator of the LCD.
• To rewrite the names of the other items in the Command
Name indicator, use the Jog Dial n to select the desired
command and repeat from step 5.
8. When you are finished rewriting, use a ballpoint pen or other
sharp point to press the MODE button z to return the remote
controller to the USE mode. The USE indicator is displayed on
the LCD, and the newly programmed codes now can be used.
ERASING PROGRAMMED CODES
(Returning to Factory Presets)
Codes that have been programmed into the memory can be erased in
3 ways: by button(s), by function(s), and by Jog Dial command.
1. Use a ballpoint pen or other sharp point to press the MODE
button z to switch the remote controller to the LEARN mode, so
that the LEARN indicator is blinking on the LCD.
Note:
Erasing of programmed codes is only possible in the LEARN
mode.
2. Erasing by Button(s)
To erase the codes and names programmed for any button,
press and hold the CLEAR button ⁄5, then press the button to be
erased twice. This will return the button to its factory presets or
leave it empty if no factory presets are available.
Jog Dial codes may be erased in the same way, by pressing and
holding the CLEAR button ⁄5 while using the Jog Dial n to call
up the command to be erased, then pressing one of the ENT
buttons m on either side of the Jog Dial n twice. This will return
the button to its factory presets or leave it empty if no factory
presets are available.
To erase codes programmed for the CLEAR button ⁄5, simply
press the CLEAR button ⁄5 continuously for 3 seconds.
As an example, let’s clear the PLAY command from the laser disc
player command set.
REWRITING NAMES
This remote controller allows the names accessible by Jog Dial
control n to be rewritten with new ones of your choosing.
• Rewriting of names is performed for each individual function.
• Let’s use a laser disc player as an example to show how to change
the
’s “SIDE-A” to “LD-A”.
1. Use a ballpoint pen or other sharp point to press the MODE
button z to switch the remote controller to the NAME mode. The
NAME indicator blinks.
2. Press the LD Function button ,.
3. Use the Jog Dial n to select the page for which you wish to enter
a new name.
4. The character on the left-hand side of the Command Name
indicator on LCD b will flash, indicating that it is the character
ready to be rewritten. New characters entered will be written over
the top of the current character so that the current character is
erased.
Use the < and > Cursor buttons ⁄0 to select the characters to be
rewritten.
5. Use the ten-key pad ⁄7 to select the desired alphanumeric
characters.
Pressing the number buttons on the ten-key pad will cycle
through the alphanumeric characters as follows:
Ten keypad Press, press again, press again, etc.
1A fi B fi C fi 1 fi A
2D fi E fi F fi 2 fi D
3G fi H fi I fi 3 fi G
4J fi K fi L fi 4 fi J
5M fi N fi O fi 5 fi M
6P fi Q fi R fi 6 fi P
7S fi T fi U fi 7 fi S
8V fi W fi X fi 8 fi V
9Y fi Z fi / fi 9 fi Y
0 SPACE fi + fi — fi , fi ’ fi 0 fi SPACE (
)
6. Therefore, to enter the letter “L”, press the 4-key on the ten-key
pad ⁄7 3 times in a row to cycle from J to K to L.
Once the desired character “L” appears, press either of the <
and > Cursor buttons ⁄0 and the L will be permanently written
over the former character. Press the 0-key in order to replace
unneeded extra characters with spaces.
MEMO
CLEAR
GUIDE
MUTE
1
2
3
4
5
6
78 0
9
DSS TV VCR
TUNER
TAPE
PHONO
AUTO
SRS
6.1
5ch-ST.
Dolby H
P-DIRE.
2CH OSD SLEEP
AMP
2
LD
ON
OFF
ON / OFF
SOURCE
MACRO
MODE
LEARNING REMOTE
CONTROL RC-17PS
POWER
MEMO
GUIDE
MUTE
CH
VOL
1
2
3
4
5
CD
DVD
CD-R/MD
DSS TV VCR
TUNER
TAPE
PHONO
AUTO
SRS
6.1
5ch-ST.
AMP
OK
2
LD
CLEAR
ENT
ENT
… 36 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz PS17 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz PS17 in the language / languages: English as an attachment in your email.

The manual is 1,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info