6528
16
Zoom out
Zoom in
Previous page
1/29
Next page
12
ENGLISH
ENGLISH
REAR PANEL
NAMES AND FUNCTIONS OF PARTS
A PHONO GND Terminal
Connect the grounding wire from an analog record player
here.
B PHONO Input Jacks
These jacks are for connecting to an analog record player.
Both MC and MM cartridges can be used, therefore set
the PHONO MC button on the front panel according to the
type of cartridge you are using.
In the bi-amp mode, the R channel jack cannot be used.
C BALANCED INPUT Jacks
These jacks are for connecting to the balanced output jacks
of a CD player or D/A converter. With the BALANCED IN-
PUT jacks of the PM-11S1, pin 1 is GND, pin 2 is Cold and
pin 3 is Hot.
In the bi-amp mode, the R channel jack cannot be used.
D CD Input Jacks
These jacks are for connecting to the output jacks of a
Super Audio CD player, CD player, etc.
In the bi-amp mode, the R channel jack cannot be used.
E LINE 1/2 Input Jacks
These jacks are for connecting to the output jacks of a
tuner, DVD player, etc.
In the bi-amp mode, the R channel jack cannot be used.
F RECORDER 1/2 IN Jacks
These jacks are for connecting to the output jacks of a CD-
R, MD deck, tape deck, etc.
In the bi-amp mode, the R channel jack cannot be used.
G RECORDER 1/2 OUT Jacks
These jacks are for connecting to the recording input jacks
of a CD-R, MD deck, tape deck, etc. Output signals can be
turned ON/OFF from the REC OUT button on the front
panel.
In the bi-amp mode, the signals input to the L channel are
output to both output jacks.
H PREOUT Jacks
These jacks are for connecting to the input jacks of an-
other main amplifier or active subwoofer. Output signals
can be turned ON/OFF from the PRE OUT button on the
front panel.
In the bi-amp mode, the signals input to the L channel are
output to both output jacks.
I SPEAKER SYSTEMS Output Terminals
You can connect 2 speaker systems to the PM-11S1.
Speaker output can be turned ON/OFF from the SPEAKER
A and B buttons on the front panel.
In the bi-amp mode, the signals input to the L channel are
output to both output terminals.
J F.C.B.S. IN/OUT Jacks
You can connect and synchronize up to four PM-11S1s in
a complete bi-amp connection or multi-channel connec-
tion. A stereo miniplug or monaural miniplug cable can be
used for the connections. For instructions on use and con-
nections, see ABOUT FCBS on pg. 17.
K Operating Mode Switch
This switch is for setting the operating mode of the PM-
11S1.
STEREO: Set to use the PM-11S1 as an ordinary 2-chan-
nel stereo amplifier.
BI-AMP: Set to use two PM-11S1s in a complete bi-amp
connection with FCBS. For more information on the bi-amp
mode, see ABOUT THE BI-AMP MODE on pg. 17.
L AC IN Socket
Connect one end of the included power cable here and
the other end to a power outlet. The PM-11S1 can be pow-
ered by 230V AC only.
AC IN
3
1
2
3
1
2
PM-11S1N ENG(P09-P26)A4 04.8.17, 11:36 PMPage 12 Adobe PageMaker 6.5J/PPC
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz PM-11S1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz PM-11S1 in the language / languages: English as an attachment in your email.

The manual is 1,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info