61654
28
Zoom out
Zoom in
Previous page
1/38
Next page
26
NAMES AND
FUNCTIONS
BASIC
CONNECTIONS
BASIC
OPERATIONS
BASIC
SETTINGS
PRACTICAL
CONNECTIONS
ADVANCED OP-
ERATIONS
IF YOU EXPERIENCE
PROBLEMS
MISCELLANEOUS
ADVANCED
OPERATIONS
ENGLISH
SWITCHING RDS INFORMATION DISPLAY
2.
1. Use the procedure described at “AUTO
PRESET,” “MANUAL PRESET” or “CALLING
UP REGISTERED BROADCAST STATIONS”
to tune in the frequency of an RDS station.
2. Press the FOLDER/CURSOR button to
switch the RDS information shown.
The display switches as shown below
each time the FOLDER/CURSOR button
is pressed.
q STATION NAME:
Displays the station name if the search
mode is set to PRESET and a name has
been registered for the station.
w PS:
Displays the program service name and
frequency of the station being received.
The above is an example of a case where
there is TP data, but no RT data.
ADVANCED OPERATIONS
e PTY:
Displays the program type of broadcast
being received.
r CT:
Displays the current time.
DAB (DIGITAL AUDIO BROADCASTING)
DAB Signal
Ensemble
Service
Components
Ensemble
Name
Station Name
Program type
National DAB
(Service 1)
Alpha 1
(Primary)
Pop Music
Parliament
(Secondary)
News
Alpha 2
Sports
Alpha 3
Classic
Alpha 4
Educate
(Service 2) (Service 3) (Service 4)
DAB Service Diagram
Since the DAB system is broadcasted in digital
format, DAB system can supply crystal-clear audio
and stable reception even in mobile objects. DAB
is a new generation radio which can provide data
service and supplementary multi-media services.
DAB broadcasts multiple services under one
Ensemble that are called service components.
Each component contains inherent programs;
news, music, sports, and many more.
Each Ensemble and service component has
its label, and users can recognize a current
broadcasting station and service contents by
using the label.
The main service component is broadcast
as Primary while the others are broadcast as
Secondary.
Also rich character information is serviced through
Dynamic Labels; song title, artist composer etc.
LISTENING TO DAB BROADCAST
Before listening to a DAB broadcast, check that the
DAB antenna is connected to the unit.
1. Select DAB as the input source using the
INPUT button on the unit or the TUNER
button on the remote controller.
Note:
• When selecting DAB for the rst time, the unit
automatically selects the receivable broadcast
stations. This selection takes about 90 seconds to
nish.
When changing the input source with the INPUT
button on the unit, be sure to put the remote
controller into TUNER mode by pressing its
TUNER button.
2. Select the broadcast station that you
want with the 1/2 buttons on the unit or
the TUNING 3/4 buttons on the remote
controller and press the ENTER button.
Note:
If the selected DAB service cannot be received,
"Station not available" is displayed on the display
panel.
M-CR502_T_DAB_01_ENG.indd 26M-CR502_T_DAB_01_ENG.indd 26 09.2.4 1:35:40 PM09.2.4 1:35:40 PM
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz M-CR502 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz M-CR502 in the language / languages: English as an attachment in your email.

The manual is 7,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info