61654
18
Zoom out
Zoom in
Previous page
1/38
Next page
16
NAMES AND
FUNCTIONS
BASIC
CONNECTIONS
BASIC
OPERATIONS
BASIC
SETTINGS
PRACTICAL
CONNECTIONS
ADVANCED
OPERATIONS
IF YOU EXPERIENCE
PROBLEMS
MISCELLANEOUS
BASIC
SETTINGS
ENGLISH
SETTING THE SLEEP TIMER
This function automatically places this unit in
standby mode when the specifi ed time arrives.
Note:
The sleep timer cannot be used to place the power
of external devices connected to the unit in standby
mode.
1.
1. 3.
2.
1. Press the TIMER button three times, select
“SLEEP OFF,” and then press the ENTER
button.
2. Select the time to be set using the VOLUME
+/– buttons while the “OFF” indicator is
ashing.
3. End sleep timer setup by pressing the
ENTER button.
A time of up to 240 minutes can be set.
Select “OFF” in Step
2. to cancel the
timer. This will cancel the sleep timer and
cause the indicator on the display
panel to go out.
The sleep timer is canceled if the power
of this unit is put in standby mode.
ADJUSTING THE TONE
1.
2.
1.
ADJUSTING THE TREBLE
1. Select “TREBLE” by pressing the TONE
button.
2. Adjust the treble using the VOLUME +/–
buttons. (–10 dB to +10 dB)
ADJUSTING THE BASS
1. Select “BASS” by pressing the TONE
button.
2. Adjust the bass using the VOLUME +/–
buttons. (–10 dB to +10 dB)
ADJUSTING LEFT-RIGHT BALANCE
1. Select “BALANCE” by pressing the TONE
button.
2. Adjust the left-right balance using the
VOLUME +/– buttons. (L (left) +6 dB ~
CENTER ~ R (right) +6 dB)
BASIC SETTINGS
CHANGING THE BRIGHTNESS OF
THE DISPLAY PANEL
1.
WHEN POWER IS ON
1. Press the DIMMER button on the remote
controller.
The brightness of the display panel
switches among three levels each time
the DIMMER button is pressed.
SETTING ECO MODE
When ECO mode is selected, the unit enters a
low-power consumption mode in which nothing
is displayed on the display panel during standby
mode.
Standby power consumption: 2.8W or less
When the display panel is off: 0.6W or less
1. While the unit’s power is ON, press the
ON/STANDBY button while holding down
the ENTER button on the front panel.
2. Select ECO ON using the 1/2 buttons on the
front panel. (Default is OFF)
3. End setup by pressing the ENTER button
on the front panel.
If you want to restore original settings,
select ECO OFF in Step
2. and press the
ENTER button.
Note:
When ON is selected for ECO mode, remote control
settings (See page 17) and reset (See page 31)
cannot be performed.
M-CR502_T_DAB_01_ENG.indd 16M-CR502_T_DAB_01_ENG.indd 16 09.2.4 1:35:33 PM09.2.4 1:35:33 PM
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz M-CR502 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz M-CR502 in the language / languages: English as an attachment in your email.

The manual is 7,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info