61654
17
Zoom out
Zoom in
Previous page
1/38
Next page
15
NAMES AND
FUNCTIONS
BASIC
CONNECTIONS
BASIC
OPERATIONS
BASIC
SETTINGS
PRACTICAL
CONNECTIONS
ADVANCED
OPERATIONS
IF YOU EXPERIENCE
PROBLEMS
MISCELLANEOUS
BASIC
SETTINGS
ENGLISH
SETTING THE TIME
Operations are performed using the remote
controller.
1.
2. 3.
1. 2.
3. 4.
1. Select “TIME” by pressing the TIMER
button and then press the ENTER button.
2. Adjust the hour setting using the VOLUME
+/– buttons while the hour indicator is
flashing on the display panel and then
press the ENTER button.
3. Adjust the minute setting using the
VOLUME +/– buttons while the minute
indicator is flashing and then press the
ENTER button.
BASIC SETTINGS
4. Confirm the time setting and exit time
setup by pressing the ENTER button while
the hour and minute indicators are fl ashing.
The hour and minute indicators will switch
from fl ashing to constantly lit at this time.
Note:
The time setting is invalid if the time is not entered
or the ENTER button is not pressed within 10
seconds while the hour and minute indicators are
ashing.
USING THE TIMER
SETTING THE WAKE-UP TIMER
This function turns on the power of this unit and
plays the selected input source when the specifi ed
time arrives.
Notes:
• Be sure that the unit has been set to the correct
time before setting the timer.
Be sure that a CD has already been loaded
beforehand if the input source for the timer is set
to CD.
Be sure that a USB device that contains MP3
or WMA music les has already been connected
beforehand if the input source for the timer is set
to USB.
7.
1.
1. 2.
3. 4.
5. 6.
2. 3.
4. 5.
6.
1. Press the TIMER button twice, select
“TIMER,” and then press the ENTER
button.
2. Select “ON” using the VOLUME +/– buttons
while the “OFF” indicator is fl ashing and
then press the ENTER button.
3. Set the hour setting using the VOLUME
+/– buttons while the hour indicator is
ashing and then press the ENTER button.
4. Set the minute setting using the VOLUME
+/– buttons while the minute indicator is
ashing and then press the ENTER button.
5. Set the input source for the timer using the
VOLUME +/– buttons while the input source
is flashing and then press the ENTER
button.
6. Set the activation time for the timer using
the VOLUME +/– buttons and then press the
ENTER button. This ends timer setup.
The set time can be selected from 30 to 90
minutes in 10 minute intervals.
Cancel the timer by selecting “OFF” in
Step 2. above. This will cancel the timer
and cause the indicator on the display
panel to go out.
7. Check the timer setting by pressing the
DISPLAY button on the remote controller.
The display shows the following each time
the DISPLAY button is pressed.
Current input source
Current time
Set time for the wake-up timer
Input source for the wake-up timer
Activation time for the wake-up timer
M-CR502_T_DAB_01_ENG.indd 15M-CR502_T_DAB_01_ENG.indd 15 09.2.4 1:35:33 PM09.2.4 1:35:33 PM
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz M-CR502 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz M-CR502 in the language / languages: English as an attachment in your email.

The manual is 7,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info