37777
20
Zoom out
Zoom in
Previous page
1/29
Next page
16
ENGLISH
7
Preset stations (FM/AM)
1. Use the Auto tuning or Manual tuning
operation to tune in the station to be preset in
the memory.
2. Press the MENU button u or n to select
menu.
3. Either turn the Easy JOG 4/¢ knob !5 or
press the 5 or button c to select Memory.
4. Press the Easy JOG 4 /¢ knob !5, or
ENTER button b to set the preset mode and
make the preset channel number flash.
Steps 1 to 4 can be skipped when using the
MEMO ⁄5 button.
When this button is pressed, the preset
memory standby mode is set, regardless of
the menu setting at that time.
5. While the preset channel number is flashing,
either press the SHIFT button ⁄8 to select the
desired memory group (A to D).
6. While the preset channel number is flashing,
either turn the Easy JOG 4/¢ knob !5,
press the 5 or button c or Numeric button
‹0 to select the desired preset channel (1 to
10).
7. While the preset channel number is flashing,
either press the Easy JOG 4/¢ knob !5 or
MEMO button ⁄5 to store the station in the
preset memory.
To preset other channels, repeat steps 2 to 6.
A total of 40 broadcast stations can be preset
10 stations (channels 1 to 10) in each of
groups A to D.
7
Recalling preset stations
(FM/AM)
On the CR401:
1.
Press the POWER ON/STANDBY switch q to
turn on the power.
2. Watching the display, press the INPUT button
i to select FM or AM.
3. Press the MENU button u to select menu.
4. Turn the Easy JOG 4/¢ knob !5 to select
Search Mode.
5. Press the Easy JOG 4/¢ knob !5 to set
search mode.
6. Turn the Easy JOG 4/¢ knob !5 to select
Preset.
7. Press the Easy JOG 4/¢ knob !5 and set
the preset mode.
8. Watching the display, turn the Easy JOG
4/¢ knob !5 to select the desired preset
channel.
On the remote controller:
1
-1
.
Press the 4 button ¤2 or ¢ button ¤3 to
select the desired preset channel.
1
-2
.
Press the SHIFT button ⁄8 and select the
desired memory group (A to D) .
1
-3
.
Press the Numeric button ‹0 to select the
desired preset channel (1 to 10).
7
RDS (Radio Data System)
RDS (works only on the FM band) is a
broadcasting service which allows station to
send additional information along with the
regular radio program signal.
The following three types of RDS information
can be received on this unit:
Program Type (PTY)
PTY identifies the type of RDS program.
The program types and their displays are as
follows:
Traffic Program (TP)
TP identifies programs that carry traffic
announcements.
This allows you to easily find out the latest
traffic conditions in your area before you
leaving home.
Radio Text (RT)
RT allows the RDS station to send text
messages that appear on the display.
Note
The operations described below pressing the
DISPLAY button ¤8 will not function in areas in
which there are no RDS broadcasts.
NEWS
AFFAIRS
INFO
SPORT
EDUCATE
DRAMA
CULTURE
SCIENCE
VARIED
POP M
ROCK M
EASY M
LIGHT M
CLASSICS
OTHER M
WEATHER
FINANCE
CHILDREN
SOCIAL
RELIGION
PHONE IN
TRAVEL
LEISURE
JAZZ
COUNTRY
NATION M
OLDIES
FOLK M
DOCUMENT
News
Current Affairs
Information
Sports
Education
Drama
Culture
Science
Varied
Pop Music
Rock Music
Easy Listening Music
Light Classical
Serious Classical
Other Music
Weather
Finance
Childrens Programs
Social Affairs
Religion
Phone In
Travel
Leisure
Jazz Music
Country Music
National Music
Oldies Music
Folk Music
Documentary
STANDBYSTANDBY
PHONESPHONES
POWER ON / STANDBYPOWER ON / STANDBY
CD RECEIVER CR401CD RECEIVER CR401
PUSH TO ENTERPUSH TO ENTER VOLUMEVOLUME
TREBLETREBLEBASSBASS
INPUTINPUT MENUMENU DIRECTDIRECT
q
u!5 i
MEMO
AUTO TUNE SLEEP SHIFT
DIRECT
AMFMDAB
--/---
MUTE
DISPLAY
VOL
INPUT
DIMM
VOL
10/0
9
8
7
6
5
4
3
21
INPUT
MODE
TUNING
PRESET
ENTER
CLOCK
CALL
MENU
CLEAR
TIMER
REPEAT
REMOTE CONTROLLER
RC601CR
REMOTE CONTROLLER
RC601CR
REMOTE CONTROLLER
RC601CR
⁄5
¤8
⁄8
‹0
n
¤1
⁄9
z
b
¤3
¤2
c
TUNER OPERATION
CR401N_01 Eng 05.11.18 4:55 PM ページ16
20


Need help? Post your question in this forum.

Forumrules
1

Forum

marantz-cr401

Reset search

  • can a turntable be connected to this unit? there is no phono input as such nor a ground connection so I'm thinking not; I tried a few of the options with no success Submitted on 27-12-2019 at 12:51

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz CR401 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz CR401 in the language / languages: English as an attachment in your email.

The manual is 1,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info