37777
19
Zoom out
Zoom in
Previous page
1/29
Next page
15
ENGLISH
TUNER OPERATION
LISTENING TO FM/AM
7
FM Auto preset memory
1. Press the POWER ON/STANDBY switch q or
button z to turn on the power.
2. Watching the display, press the INPUT button
i or . or FM button ⁄9 to select the FM band.
3. Press the AUTO TUNE button ⁄4.
4. Press the ENTER button b.
The unit automatically begins searching for
FM broadcast stations.
When the first FM broadcast station is found,
that station is stored in the preset memory at
channel A1.
Subsequent stations are automatically stored
in order at preset channels A1 to A10, B1 to
B10, C1 to C10, D1 to D10 for a maximum of
40 stations.
Channel A1 is tuned in after the auto preset
memory operation is completed.
Notes
If an FM station cannot be preset automatically
due to poor reception, use the Manual tuning
operation to tune in the station, then preset it
using the manual Preset memory operation.
To interrupt this function, press the
POWER
ON/STANDBY switch q or button z
.
Perform this operation from the remote control
unit.
7
Default value
7
Auto tuning (FM/AM)
1. Press the POWER ON/STANDBY switch q or
button z to turn on the power.
2. Watching the display, press the INPUT button
i or . or FM button ⁄9 or AM button ¤1 to
select the desired band (AM or FM).
3. Press the MENU button u or n to select
menu.
4. Either turn the Easy JOG 4/¢ knob !5 or
press the 5 or button c to select Search
Mode.
5. Press the Easy JOG 4 /¢ knob !5 or
ENTER button b to set search mode.
6. Either turn the Easy JOG 4/¢ knob !5 or
press the 5 or button c to select Auto.
7. Press the Easy JOG 4 /¢ knob !5 or
ENTER button b to set the auto tuning mode.
Auto tuner presets
A1 ~ A10
87.5 / 89.1 / 98.1 / 108 / 90.1 / 90.1 /
90.1 / 90.1 / 90.1 / 90.1 MHz
B1 ~ B10
522 / 603 / 999 / 1404 / 1611 kHz,
90.1 / 90.1 / 90.1 / 90.1 / 90.1 MHz
C1 ~ C10 90.1 MHz
D1 ~ D10 90.1 MHz
8. Either turn the Easy JOG 4/¢ knob !5 or
press the 1 button ⁄1 or ¡ button ⁄2.
Automatic searching begins, then stops when
a station tuned in.
Notes
When in the auto tuning mode on the FM band,
the display on the panel when the stereo
broadcast is tuned in. At open frequencies, the
noise is muted and the tuned off.
If the signal is weak, if may be difficult to tune
into the station in stereo. In such a case, press
the MODE button , on the remote control. FM
stereo broadcasts are received in monaural and
the is not illuminated. To return to stereo
mode, press the MODE button , on the remote
control again.
If tuning does not stop at the desired station.
Use Manual tuning operation.
7
Manual tuning (FM/AM)
1. Press the POWER ON/STANDBY switch q or
button z to turn on the power.
2. Watching the display, press the INPUT button
i or . or FM button ⁄9 or AM button ¤1 to
select the desired band (AM or FM).
3. Press the MENU button u or n to select
menu.
4. Either turn the Easy JOG 4/¢ knob !5 or
press the 5 or button c to select Search
Mode.
5. Press the Easy JOG 4 /¢ knob !5 or
ENTER button b to set search mode.
6. Either turn the Easy JOG 4/¢ knob !5 or
press the 5 or button c to select Manual.
7.
Press the Easy JOG 4/¢ knob !5 or ENTER
button b to set the manual tuning mode.
8. Either turn the Easy JOG 4/¢ knob !5 or
press the 1 button ⁄1 or ¡ button ⁄2 to tune
in the desired station.
The frequency changes continuously when
the 1 button ⁄1 or ¡ button ⁄2 on the
remote control unit is held in.
STANDBYSTANDBY
PHONESPHONES
POWER ON / STANDBYPOWER ON / STANDBY
CD RECEIVER CR401CD RECEIVER CR401
PUSH TO ENTERPUSH TO ENTER VOLUMEVOLUME
TREBLETREBLEBASSBASS
INPUTINPUT MENUMENU DIRECTDIRECT
i
q
u!5
MEMO
AUTO TUNE SLEEP SHIFT
DIRECT
AMFMDAB
--/---
MUTE
DISPLAY
VOL
INPUT
DIMM
VOL
10/0
9
8
7
6
5
4
3
21
INPUT
MODE
TUNING
PRESET
ENTER
CLOCK
CALL
MENU
CLEAR
TIMER
REPEAT
REMOTE CONTROLLER
RC601CR
REMOTE CONTROLLER
RC601CR
REMOTE CONTROLLER
RC601CR
n
⁄4
¤1
⁄9
.
z
b
,
⁄2
⁄1
c
STEREO receive mode
TUNED mode
AUTO TUNING mode
CR401N_01 Eng 05.11.18 4:55 PM ページ15
19


Need help? Post your question in this forum.

Forumrules
1

Forum

marantz-cr401

Reset search

  • can a turntable be connected to this unit? there is no phono input as such nor a ground connection so I'm thinking not; I tried a few of the options with no success Submitted on 27-12-2019 at 12:51

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantz CR401 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantz CR401 in the language / languages: English as an attachment in your email.

The manual is 1,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info