743689

Marantec Control 410 Manual

9
Zoom out
Zoom in
Previous page
1/46
Next page
84
Istruzioni d’uso Control 410
Installazione e messa in funzione
4.7.4 Limitazione del ciclo operativo e relativa tolleranza
Procedura di apprendimento della limitazione del ciclo operativo (passo 3)
Dopo l’installazione di una serranda occorre impostare nella centralina la
limitazione del ciclo operativo del motore nelle direzioni di apertura e
chiusura. Questa operazione è necessaria per motivi di sicurezza: se ad
esempio dovessero essere difettosi i fine corsa interni del motore, il motore
non si fermerebbe mai e la serranda verrebbe danneggiata meccanicamente.
Se la centralina viene utilizzata a uomo presente, la limitazione del ciclo
operativo deve essere memorizzata con aperture a uomo presente, altrimenti
la centralina non lo apprenderebbe correttamente. Non è importante da quale
posizione della serranda si inizia la procedura di memorizzazione del ciclo
operativo. Una volta terminata la procedura (da 2 a 3 aperture o chiusure
della serranda), la serranda rimane nella posizione di fine corsa di Apertura.
A serranda ferma occorre attenersi al seguente schema:
9
Installation und Inbetriebnahme
Betriebsanleitung Control 410
4 Installation und Inbetriebnahme
4.1 Installationsschritte
Um die Steuerung in Betrieb zu nehmen, sind mindestens die nachfolgend
auf geführten Schritte in der angegebenen Reihenfolge abzuarbeiten. Danach
ist eine Torbedienung am Steuerungsgehäuse oder über einen
Funk hand sen der möglich. Ergänzende Installationen können bei Bedarf im
Nachhinein durch geführt werden. Für die grundlegenden Funktionen hat dies
jedoch keine Auswirkungen.
Sollte die Steuerung während der Installation und
Inbetrieb nah me in den Fehlermodus wechseln (Sicherheits LED
oder Betriebs LED blinkt), da z.B. die Einstellungen noch nicht
korrekt vorgenommen wurden, kann das Rücksetzen (Reset, s.
Kap. 5.2, S. 28) in den normalen Be triebs mo dus durch Trennen
der Steuerung vom Netz für mindestens 3 Sekunden geschehen
(Stecker ziehen, Entfernen der Siche rung, o.ä.).
Schritt Beschreibung Verweis
1 Steuerung installieren Kap. 4.2
2 Endlagen des Motors einstellen Beschreibung Motorhersteller
3
Motor an Steuerung anschließen
Steuerung an Netz anschließen
Kap. 4.2
Kap. 4.6
4
Betriebsart auswählen (Totmannbetrieb
aktivieren/deaktivieren)
Kap. 4.7.2
5
Sicherheitseinrichtungen anschließen
(Abrollsicherung, OSE, Kontaktleiste 8,2 kOhm,
Lichtschranke...)
Beschreibung der
Sicherheitseinrichtung Kap. 4.5
6
Schließkantensicherung und evtl. Lichtschranke
im Menü aktivieren
Kap. 4.7.3
7 Funktion der Sicherheitseinrichtung testen Kap. 4.7.3
8
Torlaufzeit in Steuerung einlernen
Laufzeittoleranz einstellen
Kap. 4.7 .4
9 Handsender einlernen Kap. 4.7.5
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantec Control 410 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantec Control 410 in the language / languages: English, German, Italian as an attachment in your email.

The manual is 7,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info