Manual Marantec Control 401 (page 17 of 72) (English, German, Dutch, French, Italian, Portuguese, Spanish)

743681

Zoom out

Zoom in

1/72

English / Page 17

Programming switch SW7

The detector has an automatic sensitivity increase device that can be switched on. If

activated the sensitivity is increased to ensure the detection of vehicles with elevated

chassis and trailer.

Programming switch SW8

In 'ON'-position - permanent presence

In 'OFF'-position - limited presence (1 hour for 3 % ∆ L/L)

The occupied status is automatically cancelled, if a vehicle or a larger

metallic object are in the loop field for more than approx. one hour.

RESET-Button

The button (S1) on the detector (RESET) allows the detector to be cancelled. This is

necessary after altering the settings of the programming switches or on making changes

to the loop geometry.

Settings on the printed circuit board

Dir

ection logic jumper setting 'AB'

Normal-no direction logic . . .

Presence logic ∏ .

Impulse logic . ∏

Presence/Impulse

PP1 – Channel 1

PP2 – Channel 2

Presence

Impulse :

After altering the setting of the programming switches

actuate reset–button S1!

2. Description of function

∏

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Marantec Control 401 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,87 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Marantec Control 401 Manual

Product: