Manual Marantec Control 14 (page 29 of 40) (English)

636186

Zoom out

Zoom in

1/40

English / Page 29

8. Connection and initial operation of the accessories

Connection with system plugs:

• Install the control element (A3, A4

or A5) to a well accessible place to

the wall near the door.

• Remove the short circuit plug from

socket X10A of the membrane

keypad Command 612 (A2).

• Connect the control element to the

system socket X10A of the membra-

ne keypad as shown in fig. 10

• Test the function of the control

element.

Fig. 10: Connection of control elements

Advice!

You can also connect every single control element directly to

the control unit (A1) via socket X10.

If two or more control elements have to be connected to the

membrane keypad, the "joint for plug system RSK”, Art.-No.:

151 228 and a flat cable, Art.-No. 562 759 are required.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Marantec Control 14 in the language / languages: English as an attachment in your email.

The manual is 0,75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Marantec Control 14

Marantec Control 14 User Manual - German - 16 pages

Marantec Control 14 Usermanual and installation guide - Dutch - 44 pages

Marantec Control 14 User Manual - French - 41 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Marantec Control 14 Manual

Product: