742639
10
Zoom out
Zoom in
Previous page
1/33
Next page
10
E N G L I S H
1. Overview Control 100 base control unit
A Plug-in strip remote control
B Change-over switch airswitch contact/closing edge safety device with optosensor
C Push button and LED „open“
D Push button and LED „close“
E LED control voltage
F Push button „stop“
G Plug-in connection membrane key
H LED test unit
I Plug-in connection X2f connection Control 200 and Control 300
J Switch S7,S8,S18,S19,S20
K Connecting terminal X2e photocell 24 V
L Connecting terminal X2c button „open“, „close“, „stop“
M Connection pins X2d for extra button „open, „close“, „stop“
N Connection pins X2a limit switch S11,S13,S14
O Connection pins X2b cable slack device, airswitch (DW) contact
P Control fuse F1, 80mA max.
Q Earthing point
R Main switch
S Connecting terminal block X2 for motor connection
T Connecting terminal block X2 for mains voltage
U Mains fuse F2-F4, 6.3 A max.
V CEE plug
W S16, S17 change-over switch for Digital 131
2. Colour code
bk - black bl - blue bn - brown gn/ye - green/yellow gr - grey pk - pink pu - purple
rd - red wt - white ye - yellow
3. Circuit diagram Control 100/Control 101
DW Airswitch contact
F1 Fuse 80 mA
FS-F4 Main fuses 6.3 A
H1 LED „control voltage“
H2 LED „direction open“
H3 LED „direction close“
H4 LED „test unit“
H5 LED „final position open“
H6 LED „final position close“
K1 Relay „open“
K2 Relay „close“
K2v Time lag relay (slow-release)
K3 Relay „pulse“
K4 Airswitch (DW) relay (bistable)
K5 Airswitch (DW) test relay (bistable)
K6 Airswitch (DW) relay
K7 Relay „stop“
K11 Helix contactor „close“
K21 Helix contactor „open“
KL Photocell
M1 Motor with thermal protection
S Main switch
S0,S0a „stop“ button (with Control 101 lockable) *
S0H „stop“ button
S1,S1a „operate or pull“ button
S2,S2a „open“ button
S2A „open“ button
S4,S4a „close“ button
S4Z „close“ button
S5 Limit switch „wicket door“
S6 Limit switch „cable slack device“ (only with „Dynamic“ shaft drive)
S7 „open“ - self hold ON/OFF
S8 „close“ - self hold ON/OFF
S10 Limit switch „emergency hand chain“ (only with „Dynamic“ shaft drive)
S11 Limit switch „open“
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantec Control 103 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantec Control 103 in the language / languages: English, German, Dutch, Danish, French, Swedish, Norwegian as an attachment in your email.

The manual is 0,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info