742793
14
Zoom out
Zoom in
Previous page
1/20
Next page
14 Operating instructions, Comfort 860, 861 (#119162 – EN)
3.6 Mounting the reference point magnet
WARNING!
Danger of injury due to uncontrolled movement of the gate!
To avoid injury, the gate must have a mechanical end stop in both
directions; otherwise it could spring out of line.
The operator system determines the extent of travel and the gate
positions electronically. To do so, it requires a reference point on
the gate or the toothed rack. A special reference point magnet is
used as the reference point.
NOTICE
Malfunctions due to incorrect installation of the reference point
magnet!
Measuring the gate operator reference point can be interfered
with or prevented by the presence of old magnets and incorrect
installation clearances. To prevent faults:
Removeanyexistingmagnets(e.g.inthecaseofretrot
measures with an existing toothed rack).
Ensure that there is a distance between the reference point
magnet (A) and the motor unit (B) of 2-8 mm.
The distance between the centre of the magnet (A) and the
centre of the spur gear (C) must be 70 mm.
3.6 / 1
70
2 – 8
A
CB
3.6 / 2
500 - 1000
Move the gate to the CLOSED position.
Determine the position for the reference point magnet.
The reference point magnet is mounted differently depending on
the type of toothed rack used.
Special 441
3.6 / 3
Special 471
3.6 / 4
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantec Comfort 861 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantec Comfort 861 in the language / languages: English as an attachment in your email.

The manual is 2,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Marantec Comfort 861

Marantec Comfort 861 User Manual - German - 20 pages

Marantec Comfort 861 User Manual - Dutch - 20 pages

Marantec Comfort 861 User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info