742793
13
Zoom out
Zoom in
Previous page
1/20
Next page
Operating instructions, Comfort 860, 861 (#119162 – EN) 13
EN
3.4 / 11
Close the gate 500 mm further at a time.
Screw the toothed rack to each closed gate section in turn, as
shown on the relevant drill pattern.
NOTICE
Malfunctions due to incorrect installation of the toothed rack!
If the adjustment between the toothed rack and the spur gear is
too tight, the operator system could jam and become damaged
during gate movement.
Ensure that a clearance of 1 to 2 mm is maintained between
the toothed rack and the spur gear.
3.4 / 12
1 – 2
Lower the motor unit by 1 to 2 mm.
“3.5 Adjusting the height of the motor unit”
A functional check must be carried out to ensure that the
toothed rack is engaged with the spur gear along its entire
length:
Ensure that the gate operator is unlocked (released).
“4.5 Emergency operation”
Move the gate slowly by hand into the OPEN and CLOSED end
positions.
The spur gear must be propelled by the movement of the gate.
3.5 Adjusting the height of the motor unit
Inordertoadjusttheheightofthemotorunit,rstloosenthe
screws(A).
Once the height has been adjusted, the screws (A) must be
retightened.
“4.2 Open the motor unit”
3.5 / 1
160
3.5 / 2
AA
3.5 / 3
3.5 / 4
“4.3 Close the motor unit”
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantec Comfort 861 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantec Comfort 861 in the language / languages: English as an attachment in your email.

The manual is 2,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Marantec Comfort 861

Marantec Comfort 861 User Manual - German - 20 pages

Marantec Comfort 861 User Manual - Dutch - 20 pages

Marantec Comfort 861 User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info