742772
6
Zoom out
Zoom in
Previous page
1/16
Next page
6 Operating instructions, Comfort 515 (#123390 – GB)
2.3 Example application
2.3 / 1
4
2
a
2
a
a
a
b
a
10
3
7
8
1
1
5
6
c
c
9
c
b
This is just an example of a gate system and can vary according to
the type of gate and the associated equipment. The gate system
shown comprises the following components:
1 Photocell
2 Photocell
3 Signal light
4 Key switch post (for code button, transponder, ...)
5 Wrench
6 Main switch (mains isolator switch)
7 Electric lock
8 Floor bumper
9 Mains cable
10 Closing edge safety device (CESD/8K2)
Cable cross-sections:
a 2 x 0.5 mm
2
b 2 x 0.75 mm
2
c 3 x 1.5 mm
2
d 2 x 0.75 mm
2
For the installation and cabling of the gate sensors, control
elements and safety equipment, the relevant installation
instructions must be observed.
3. Installation
3.1 Example application
Danger if the operating manual is ignored!
This chapter includes important information for safe assembly
of the product.
Read this manual carefully before installation.
Follow the safety instructions.
Complete the assembly as described.
Assemblybyqualiedtechnicalpersonnelonly.
“1.2.2 Technical personnel“
Technicalelectricalworkmayonlybecompletedbyqualied
electricians.
“1.2.2 Technical personnel“
Prior to assembly, ensure that the voltage supply is
disconnected and remains so. The voltage supply is only
re-established after this is requested in the corresponding
assembly step.
Local protection regulations must be observed.
Electrical supply cables and control cables must be laid out
separately. The controls voltage is 24 v DC.
The gate must be in good mechanical condition:
The gate is easy to move.
The gate opens and closes correctly.
The motor unit may only be installed with the gate closed.
All impulse transmitters and control devices (e.g. remote
control buttons) must be installed within sight of the gate
and at a safe distance from the moving parts of the gate.
Aminimuminstallationheightof1.5mmustbemaintained.
Only fastening material that is suitable for the respective
construction surface may be used.
NOTICE
Material damage may result from improper care of drive!
Grease and oil can attack the plastic materials of the drive system
and lead to the plastic becoming cracked and fractured. To
prevent damage, the drive system must not be oiled or greased.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantec Comfort 515 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantec Comfort 515 in the language / languages: English as an attachment in your email.

The manual is 1,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Marantec Comfort 515

Marantec Comfort 515 User Manual - German - 16 pages

Marantec Comfort 515 User Manual - Dutch - 16 pages

Marantec Comfort 515 User Manual - French - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info