742772
14
Zoom out
Zoom in
Previous page
1/16
Next page
14 Operating instructions, Comfort 515 (#123390 – GB)
6.2 Requirements to be met by qualied
technical personnel
Power-operated windows, doors and gates must be inspected by
qualiedpersonnelwhenevernecessary,butatleastonceayear
(written inspection records must be kept).
Test the driving power with a force tester designed for this
purpose.
Replace any damaged or worn parts.
7. Disassembly
Disassemblybyqualiedtechnicalpersonnelonly.
“1.2.2 Technical personnel“
Risk of fatal injuries due to electric shocks!
Parts that conduct power may cause electrical shocks, burns, or
death.
Take measures to ensure that the power supply remains
disconnected and remains so during disassembly.
Possibility of serious injury if disassembled incorrectly!
Observe all the applicable health and safety regulations.
Disassemblymustbecompletedbyqualiedtechnicalpersonnelin
the reverse sequence as assembly.
8. Disposal
Disposalbyqualiedtechnicalpersonnelonly.
“1.2.2 Technical personnel“
Do not dispose of old equipment or batteries with
the normal household waste!
Dispose of old devices at a waste collection centre for
electronic waste or via your specialist dealer.
Dispose of old batteries in a battery recycling container or via a
specialist dealer.
Dispose of the packaging material in the special waste
collection containers for paper, cardboard and plastic.
9. Rectifying faults
To rectify faults, follow the instructions in the control unit
documentation.
5. Care and cleaning
WARNING!
Risk of fatal injuries due to electric shocks!
Parts that conduct power may cause electrical shocks, burns, or
death.
Take measures to ensure that the power supply remains
disconnected and remains so for the duration of the cleaning
operation.
Material damage may result from improper care of drive!
Grease and oil can attack the plastic materials of the drive system
and lead to the plastic becoming cracked and fractured. To
prevent damage, the drive system must not be oiled or greased.
Damage resulting from incorrect operation!
When cleaning the operator system, never use:
direct water jets, high pressure cleaners, acids or alkaline
solutions.
Use a soft, lint-free cloth for cleaning.
If particularly dirty, the housing can be cleaned using a mild
detergent.
Clean the outside of the housing using a damp cloth.
6. Maintenance
6.1 Maintenance work by the operator
Damageorweartoagatesystemmayonlyberectiedbyqualied
technical personnel.
To ensure fault-free operation, the gate system must be inspected
regularly and, if necessary, be repaired. Before starting work on the
gate system, the operator system must always be disconnected
from the power supply.
Check once a month that the operator system reverses when
the gate touches an obstacle. Place an obstacle in the path of
the gate to check this.
Check all the moving parts of the gate system and gate
operator system.
Check the gate system for signs of damage or wear and tear.
Move the gate manually to check that the gate travels easily and
smoothly.
Check that the photocell functions properly.
Check that the closing edge safety device functions properly.
Check the power supply cable for signs of damage.
For safety reasons, if the power supply cable is damaged it
must be replaced by the manufacturer or his customer service
department,orbyasimilarlyqualiedperson.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantec Comfort 515 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantec Comfort 515 in the language / languages: English as an attachment in your email.

The manual is 1,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Marantec Comfort 515

Marantec Comfort 515 User Manual - German - 16 pages

Marantec Comfort 515 User Manual - Dutch - 16 pages

Marantec Comfort 515 User Manual - French - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info