680457
12
Zoom out
Zoom in
Previous page
1/24
Next page
12 Operating instructions, Comfort 50, 60 (#104172 – GB)
5.2 Factory settings
Using the reset procedure, the operator parameters can be restored to
their original factory settings.
“Menu 11 – RESET“
5.3 Express programming
To set the operator system properly in service and after every reset, the
express programming procedure must be carried out.
Requirements:
The door must be in the CLOSED position.
The carriage must be coupled up.
When in programming mode, the controls will revert automatically to
operating mode if a period of 120 seconds passes without any buttons
being pressed.
A corresponding fault number will be displayed.
“11. Rectifying faults“
Carry out the express programming procedure.
CHECK
A function test must be carried out after express programming.
“5.4 Function test“
Express programming
1. Programming the “OPEN” door position
The control system is in
operating mode.
PP > 3 sec. < 10 sec.:
Start express programming.
Drive the door to the OPEN
position.
PSave the OPEN position.
2. Programming the “CLOSED” door position
Drive the door to the CLOSED
position.
PSave the CLOSED position.
3. Programming the remote control Multi-Bit
Press the hand transmitter
button.
Release the hand transmitter
button.
PSave the remote control
setting.
End express programming.
The control system is in
operating mode.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantec Comfort 50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantec Comfort 50 in the language / languages: English as an attachment in your email.

The manual is 5,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Marantec Comfort 50

Marantec Comfort 50 User Manual - German - 24 pages

Marantec Comfort 50 User Manual - Dutch - 24 pages

Marantec Comfort 50 Installation Guide - Dutch - 24 pages

Marantec Comfort 50 User Manual - French - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info