636181
22
Zoom out
Zoom in
Previous page
1/36
Next page
22 Operating instructions, Comfort 360, 370, 380 (#101258 – EN)
4.7.2 Removing the MSA
4.7.2 / 1
4.7.2 / 2
XB72
Service Access
dacb Rxx
xxxxxxx
IDXXXXX
Made in Germany
MSA
4.7.2 / 3
XB72
4.7.2 / 4
4.8 Special programming
WARNING!
Risk of injury due to incorrect gate force setting!
In order to guarantee personal protection, the gate forces
mustcomplywithspeciedlimitvalues.Iftheparametersare
changed, these limit values could be exceeded. After changing
the settings, it is therefore necessary to check the gate forces
to guarantee safe operation.
Test the automatic cut-out.
“4.6.3Checkingtheautomaticcut-out”
After a reset, all parameters are reset to the factory settings.
Connected and functional safety elements are redetected after the
reset.
Connected further accessories must be reprogrammed after a
reset.
In order to guarantee faultless operation of the controller:
Reprogram all desired functions.
Teach the remote control again.
Run the drive system into the gate position OPEN and CLOSED
once.
A connected photocell is automatically detected by the controller
as soon as the power supply is connected. The photocell can be
retrospectively reprogrammed.
Unwanted photocells must be disconnected before the power
supply is connected, otherwise the controller will detect them.
“3.4.5Connectionof2-wirephotocell(XB03)”
“3.4.6Connectionof4-wirephotocell(XB03)”
It is necessary to perform a functional test after changes in
programming mode.
“4.6Functiontest”
22


Need help? Post your question in this forum.

Forumrules
1

Forum

marantec-comfort-370

Reset search

  • good morning to all. I have a confort 370 and I dont know how to repair the error 9 Submitted on 27-3-2021 at 10:55

    Reply Report abuse
    • Please contact us we will help you +495247705178
      Best regards
      Sebastian Answered on 8-4-2021 at 07:45

      Vote up Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantec Comfort 370 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantec Comfort 370 in the language / languages: English as an attachment in your email.

The manual is 5,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Marantec Comfort 370

Marantec Comfort 370 User Manual - German - 36 pages

Marantec Comfort 370 User Manual - Dutch - 26 pages

Marantec Comfort 370 User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info