742762
14
Zoom out
Zoom in
Previous page
1/40
Next page
8.2 Control connections for operator system
Attention!
In order to avoid damaging the controls:
- The local safety regulations must be complied
with at all times.
- It is very important that mains cables are laid
separately from control cables.
- The controls voltage must be 24 V DC.
- If external voltages are applied at terminals
XW40, XB10 or XB02, the entire electronic
system will be destroyed.
- Only potential-free normally open contacts
may be connected to terminals 1 and 2
(XB02).
- The shorting plug should never be plugged
into the XP020 system socket!
Caution!
Danger of electric shock:
Before any cabling works begin, it must be
ensured that the cables are disconnected from
the power supply.
During cabling works, it must be ensured that
the cables remain disconnected from the power
supply at all times (e.g. prevent reconnection).
XB10
XB02
XW40
8.2 / 1
Label Type / function
i
XB02
Connection of external control
elements without system cabling and
two-wire photocell
9.3 /
Level 5 /
Menu 1
XB10 Connection of external control
elements with system cabling -
XW40 Connection for operating control 8.1
XB70 Has no function -
XB70
8. Initial operation
Close the housing cover.
Swivel all four screws into place above the housing cover.
Screw the housing cover tight..
8.1 / 3
Attention!
- To avoid damage to the cabling, care must be
taken not to trap the cables when closing the
cover.
- To maintain the specified protection category
of the operator system
- the inlet openings must be fitted with
suitable cable gaskets,
- the cables must lie correctly in the inlets,
- the plug-in cable inlets must be
correctly connected to the control unit.
14 Installation and Operating Instructions, Comfort 257.2 GB (#99737)
8.1 / 3
Connect the mains cable to terminal XN 81 and to the
PE connection (H).
H
Designation Terminal colour
L Brown
N Blue
H Green/yellow
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantec Comfort 257.2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantec Comfort 257.2 in the language / languages: English as an attachment in your email.

The manual is 4,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Marantec Comfort 257.2

Marantec Comfort 257.2 User Manual - German - 40 pages

Marantec Comfort 257.2 User Manual - German - 40 pages

Marantec Comfort 257.2 User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info