742762
13
Zoom out
Zoom in
Previous page
1/40
Next page
8.1 / 2
Attention!
To ensure that the system functions properly,
- the plugs of the system cable (A) must be
inserted in the designated sockets in the
motor unit (B) and in the operating control (C),
and
- the connecting cables (E + F) must be
connected up correctly.
Motor unit Connection Control unit
XW40 <---> XW40A
B
A
D
C
XW40
XW40A
8.1 Cabling of the operator system and the
Control vario control
Loosen all 4 screws on the housing cover.
Swivel all four screws away from the cover.
Open the housing cover out to one side.
8.1 / 1
Advice:
The screws need not be removed in order to
open the housing cover. Advice:
Programming can be disabled with the DIP
switch (D).
ON Programming enabled
OFF Programming disabled
8. Initial operation
Attention!
- To avoid damage, it is essential that the
following points be observed:
- The local protection regulations are to be
complied with at all times.
- - The mains cables and control cables MUST
be laid separately.
- To maintain the specified protection category
of the operating system, the cables must be
fitted with the correct gaskets.
Caution!
Danger of electric shock:
Before cabling works commence, a check must
be carried out to ensure that the cables are at
zero voltage.
Measures must be taken to ensure that the
cables remain dead for the duration of the
works (e.g. prevent the power supply from
being switched back on).
Installation and Operating Instructions, Comfort 257.2 GB (#99737) 13
Connect the mains routing cable (E) to the motor unit (B) and
the control unit (C).
Break open the cable inlet in the control unit (C) at position (G).
Feed the mains cable (F) into the control unit (C) through
opening (G).
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantec Comfort 257.2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantec Comfort 257.2 in the language / languages: English as an attachment in your email.

The manual is 4,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Marantec Comfort 257.2

Marantec Comfort 257.2 User Manual - German - 40 pages

Marantec Comfort 257.2 User Manual - German - 40 pages

Marantec Comfort 257.2 User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info