20 Manual for installation and operation, Comfort 211 GB (#72752)
7. Hand transmitter
7.2 Hand transmitter coding
7.2.1 Transfer the coding
Advice:
The plug connections on both sides of
the hand transmitter are identical.
Advice:
For multi-channel hand transmitters,
the coding procedure has to be carried
out for each button separately.
Using this function it is possible to transfer the coding
of a hand transmitter that has already been
programmed for operating the operator system
(master transmitter) to another hand transmitter.
• Connect both transmitters with the enclosed
transmission plug.
• Actuate the master transmitter and hold the button.
The transmitter LED lights up.
• Whilst keeping the button on the master transmitter
depressed, press the desired button on the other
hand transmitter.
The LED flashes.
After 1 -2 seconds, the LED on the newly programmed
transmitter lights up permanently.
The programming procedure is complete.
The coding of the master transmitter has now been
transferred to the other hand transmitter.
• Remove the transmission plug.
Caution!
Before operating the hand transmitter,
ensure that there are neither persons
nor objects in the operating range
of the door.
7.2.1 / 1
7.2.1 / 2
7.2.1 / 3
