636174
26
Zoom out
Zoom in
Previous page
1/64
Next page
English Page 26
Test instructions - only for specialists -
Trouble shooting:
Fault characteristic Remedy
The door moves itself for unknown
reasons.
Ensure that all fixings are carefully tightened.Also
ensure that the door is in perfect condition as well as
greased and balanced carefully.
Disconnect all impulse transmitters (wall button, key
switch etc.) from terminal block.
Reconnect one impulse transmitter after the other and
check it every time by a test run. The door should
then start to move. In case the motor operates in one
case by itself, check the cabling searching for a faulty
contact. If you cannot clearly determin the reason,
disconnect the respective impulse transmitter (point 14)
Check the setting of CLOSE travel limit (point 15/2)
Check the CLOSE automatic cut-out (point 17/2)
Check connection (point 14) or programming of
photocell (point 17/3)
Ensure, that the door is in perfect condition as well as
greased and balanced carefully.
Check the setting of OPEN travel limit (point 15/1)
Check the OPEN automatic cut-out (point 17/1)
Check the mains connection
Connect a lamp to the mains electric socket used for
the motor. If the lamp lights up, the mains supply is
OK. If not, check the fuses.
Check the connections on the connecting terminal of
motor (point 14).
Check the connections to the wall button.
Noisy operation
The motor cannot be operated using
the wall button
Ensure that the carriage engaged (point 13)
Check the battery in the hand transmitter.
Relearn the coding (point 17/3)
Put the remote control to another place in the car.
Point with remote control to the door.
Replace battery.
Ensure, that the door is in perfect condition as well as
greased and balanced carefully.
Check the setting of CLOSE travel limit (point 15/2)
Check the CLOSE automatic cut-out (point 17/2)
The motor cannot be operated
The motor starts, but the door is not
opened
The motor can only be operated
pressing button
O
P but not by the
remote control
Insufficient range of remote control
(less than 6 m)
The door travels downwards, but it
stops before it is fully closed
The door travels upwards, but it stops
before it is fully opened
The door can only be opened
O
20
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantec Comfort 210 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantec Comfort 210 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 0,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info