Manual Marantec Comfort 210 (page 24 of 64) (English, German, Dutch, French, Italian)

636174

Zoom out

Zoom in

1/64

English Page 24

• Press simultaneously (approx. 3 sec.) buttons



and

P to activate the 'CLOSE automatic

cut-out' programming mode.

• The red LED starts to flash.

Select the required value by pressing buttons



and



The LED's indicate the following three settings of forces:

green LED is glowing: minimum force = stage 1

green and red LED's are glowing: intermediate force = stages 2 - 15

red LED is glowing: maximum force = stage 16

• Save by pressing programming button

P .

Set the automatic cut-out as sensitively as possible (max. 150 N at the closing edge).

Press simultaneously (approx. 3 sec.) the buttons



and



to activate the 'remote control'

• Green and red LED's start to flash and after releasing the buttons, the LED's are glowing

permanently.

• Press the corresponding button of the hand transmitter until green and red LED flash rapidly.

• Press now programming button

P to save coding.

• The green and red LED's flash in alteration.

3. Programming the remote control / photocell

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Marantec Comfort 210 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 0,62 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Marantec Comfort 210 Manual

Product: