742661

Marantec Comfort 150DC Manual

14
Zoom out
Zoom in
Previous page
1/32
Next page
EnglishDeutsch Page 51
LED OFF
LED glows
LED flashes
LED flashes rapidly
Factory setting
• Once button P is no longer pressed, indicator 4
(earlyclosing after driving past the through-traffic photocell) flashes.
• Using the
or
buttons, the function 'early closing after driving past the
through-traffic photocell' or a set time phase can be programmed.
Indicator 1 flashes: Door closes after the set time phase.
Indicator 1 glows: Door closes after driving past the through-traffic photocell.
• Complete the programming process by once again pressing programming button P; recogniz-
able by all indicators going out in the sequence 8 - 1.
• Afterwards, the control unit returns to the operating state (indicator 8 glows; if the door is in
an open or closed state, the corresponding indicators 2 or 4 also glow).
• Once button P is no longer pressed, indicator 3 (start-up warning) flashes.
• Using the buttons, the start-up warning can be set (see table).
Minimum value: 0 seconds
Maximum value: 7 seconds
• Store by pressing programming button P.
Seite 14
1. Programmierung externe Lichtschranke
(Der Torantrieb ist vorprogrammiert zum Anschluß einer externen
Durchfahrts- Lichtschranke. Wird diese Lichtschranke nicht angeschlossen,
muß gem. Pkt. 22/1 umprogrammiert werden. Antrieb läuft sonst ohne
Selbsthaltung in Richtung Zu).
• Programmiertaste P für ca. 2 Sekunden betätigen, bis Anzeige 1 blinkt.
• Mit der Taste
wird der Anschluß der externen Lichtschranke ermöglicht.
• Anzeige 1 leuchtet.
• Durch Betätigen der Taste
kann der Antrieb ohne externe Lichtschranke
betrieben werden.
• Anzeige 1 blinkt.
• Mit der Programmiertaste P abspeichern
2. Programmierung der 'Endlage Auf'
• Anzeige 2 blinkt.
• Mit den Tasten
oder
das Tor in die Endstellung 'Tor auf' verfahren
(Antrieb verfährt ohne Selbsthaltung).
• Mit der Programmiertaste P abspeichern
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marantec Comfort 150DC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marantec Comfort 150DC in the language / languages: English, German as an attachment in your email.

The manual is 1,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Marantec Comfort 150DC

Marantec Comfort 150DC User Manual - Dutch, French - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info