Manual Mamiya RZ67proII (page 25 of 43) (English)

15434

Zoom out

Zoom in

1/43

Removing the Holder

Insert the Dark Slide into the Roll Film

Holder. For instant recognition, the Dark Slide

Slot is bordered by white reference lines. The

Film Holder can be removed after moving the

Holder Lock Lever as far as it will go toward

the Lock Release Lever “A”. It is

recommended that you remove the holder on a

table or similar support, or in your lap, to avoid

the possibility of dropping the holder or having

it fall off the camera.

If you attempt to remove the holder without

replacing the Dark Slide, the Holder Lock

Lever will automatically lock in place,

preventing accidental removal of the holder

and exposure of the film.

However, if you must remove the holder

without the Dark Slide in place, the automatic

lock can be overridden by pulling the Lock

Release Lever toward the Holder Lock Lever,

holding the lever there, and then moving the

Lock Lever.

Pulling out the Dark Slide of a

Detached Roll Film Holder

When detached from the camera body, the

Dark Slide cannot be pulled out. However, if

you wish to remove it, push in the pin “A” on

the holder with a pointed object.

Note: Non-Compatibility of Roll Film Holder

Inserts.

While all model RZ and RZ PRO

II roll film

holders can be used with both the RZ and

RZ PRO

II, this does not apply to the

interchangeability of the film holder inserts.

They can only be used with their respective

oll film holder housings.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Mamiya RZ67proII in the language / languages: English as an attachment in your email.

The manual is 1,1 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Mamiya RZ67proII Manual

Product: