Manual Mamiya RZ67proII (page 24 of 43) (English)

15434

Zoom out

Zoom in

1/43

The Roll Film Holder

Attaching the Holder

1. Slide the Holder Lock Lever of the Roll

Film Holder completely toward the Lock

Release Lever “A”.

2. Align the orange circle “B” of the Revolving

Ring (found at the rear of the camera) with one

of the two white index marks “C” or “D”

on the

camera body.

3. Hold the Holder so that its orange circle is at

the same position as the one on the Re-volving

Ring “B” and fit the holder onto the camera

back, making sure that the four Camera Back

Mount Pins fit into the four openings of the

holder.

• Do not touch the Light Baffle or mirror.

Touching the Baffle could result in light leaking

in or other malfunction.

4. Lock the holder to the camera body by

moving the Slide Lock as far as it will go as

indicated by the arrow.

• Make sure that the holder securely couples

with the camera body; otherwise light may

leak in and cause film damage.

Because of the revolving back feature,

attaching the roll film holder to the camera

requires a little practice. We find that a good

method is to place the bottom edge of the

holder against the bottom edge of the body,

(preferably while resting on a flat surface)

letting the top of the holder leave a slight

gap, permitting you look down and to match

the two bottom mounting pins of the

revolving back to the corresponding holes of

the holder.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Mamiya RZ67proII in the language / languages: English as an attachment in your email.

The manual is 1,1 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Mamiya RZ67proII Manual

Product: