801547
15
Zoom out
Zoom in
Previous page
1/30
Next page
MODE 1: ADJUSTING GROUND BALANCE
After the device is turned On, the “GROUND BALANCE” section will
appear automatically. You should first check your SENSITIVITY
adjustment to be able to obtain accurate results. The Sensitivity
level recommended for new users is 8. When you reach soil structu-
res with varying ground eects during your search and when you
need to renew your ground balance, switch to the Ground section
by pressing the “GROUND” button. You should periodically check
and readjust your ground balance as necessary.
Turn the On/O button to the Mode 1 position. When the
device is On, the Ground Balance screen will appear
automatically.
For adjusting Ground Balance;
1
First, raise the coil approximately 40 cm above the ground
(around your knee level) at the original position and press
the RESET button.
Note: If you fail to raise the coil 40 cm above and begin by
pressing the RESET, no operation to be performed
afterwards will be accurate.
440 cm
When you enter the Ground Balance menu the current
setting stage is displayed on the screen as “Ground Balance”.
This value will be between -201 and +201.
2
If you run in to a location where you are not able to adjust the Ground Balance this
is caused by one of two situations. 1. You have located a target OR 2. There exists
a mineral structure in the ground that is not suitable for your sensitivity level. In
this case, you should change your position elsewhere from the point which does
not allow such adjustment and retry readjusting the Ground Balance; if still
unsuccessful, the sensitivity level should be reduced by 1 increment.
3
GROUND
DEPTH
RECORD
12
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makro Deephunter 3D PRO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makro Deephunter 3D PRO in the language / languages: English as an attachment in your email.

The manual is 1.56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Makro Deephunter 3D PRO

Makro Deephunter 3D PRO User Manual - Dutch - 34 pages

Makro Deephunter 3D PRO User Manual - French - 30 pages

Makro Deephunter 3D PRO User Manual - Turkish - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info