801547
13
Zoom out
Zoom in
Previous page
1/30
Next page
USAGE with MODE 1 (VISUAL SYSTEM)
10
Reset Button
CAUTION
Use of RESET Button: Some interferences arising from
imbalanced motion of the coil and from the environment
may occur while using the device. Such interference is
shown on the device display and can cause the device to
produce an audio signal. Reset the device by pressing the
“RESET button located under the handset. The Impact of
this interference is eliminated through resetting the device
in this fashion. You should not reset the device while coil is over the target! This
will cause loss of depth, the wrong interpretation of the incoming signal and will
prevent the device from detecting the target. Resetting is done only after the coil
is moved away from the target.
Checking Battery Charge Status
The device will proceed to the “Ground Balance
section after identifying the attached coil. At the bottom of this section, there is a part
indicating the battery status. The battery should be recharged as required.
By pressing “+” and “-” keys, you will come to the desired area in the “SOUND, “LIGHT,
“SENSITIVITY” or “FERROUS” sections, as shown above. After reaching the desired selec-
tion, press the “OK” button. The indicator bar will turn from yellow to green. Perform the
desired adjustments by using the “+” and “-” keys and then press the “OK” button. The
Green indicator will again turn to yellow. Now, your adjustments are saved. Repeat the
same steps above to adjust other settings as desired.
Entering Settings Menu
Press the “MENU” button, no matter what section you are in, for
adjusting device features such as sound, light, sensitivity and
non-precious elimination. Current settings will be displayed under
the respective section on the screen. Return to the previous menu
by pressing “MENU” button after you make the adjustment of the
desired selection.
GROUND
DEPTH
RECORD
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makro Deephunter 3D PRO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makro Deephunter 3D PRO in the language / languages: English as an attachment in your email.

The manual is 1.56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Makro Deephunter 3D PRO

Makro Deephunter 3D PRO User Manual - Dutch - 34 pages

Makro Deephunter 3D PRO User Manual - French - 30 pages

Makro Deephunter 3D PRO User Manual - Turkish - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info