Manual Makita UM600D (page 18 of 108) (English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish)

690687

Zoom out

Zoom in

1/108

18 ENGLISH

NOTICE: Do not cut down dead trees or similar

hard objects. Doing so may damage the tool.

NOTICE: Do not trim the grass or weeds while

using the shear blades.Thebladesmaybecome

tangled in the grass or weeds.

Hold the tool with one hand, pull the switch trigger while

pressingthelock-offbutton,andthenmoveitforward.

►Fig.45

Forbasicoperation,tiltthebladestowardthetrimming

direction and move it calmly and slowly at the speed

rateof3to4secondspermeter.

►Fig.46

Totieastringatthedesiredheightandtotrimalongit

help you to cut a hedge top evenly.

►Fig.47

Ifthechipreceiverisattachedtotheblades,itgathers

discardedleavesandmakesclean-upafterwardmuch

easier.

Tocutahedgesideevenly,cutfromthebottomtotop.

►Fig.48

Whentrimmingtomakearoundshape(trimmingbox-

woodorrhododendron,etc.),trimfromtheroottothe

topforabeautifulnish.

►Fig.49

MAINTENANCE

CAUTION: Always be sure that the tool is

switched off and the battery cartridge is removed

before attempting to perform inspection or

maintenance.

TomaintainproductSAFETYandRELIABILITY,

repairs,anyothermaintenanceoradjustmentshould

beperformedbyMakitaAuthorizedorFactoryService

Centers,alwaysusingMakitareplacementparts.

Cleaning the tool

Cleanthetoolbywipingoffdustwithadryclothorone

dipped in soapy water and wrung out.

NOTICE: Never use gasoline, benzine, thinner,

alcohol or the like. Discoloration, deformation or

cracks may result.

Blade maintenance

Beforetheoperationoronceperhourduringoperation,

applylow-viscosityoil(machineoil,orspray-typelubri-

catingoil)totheblades.

►Fig.50

►Fig.51

Afteroperation,removedustfrombothsidesofthe

bladeswithawiredbrush,wipeitoffwithaclothand

then apply low-viscosity oil (machine oil, or spray-type

lubricatingoil)totheblades.

►Fig.52

►Fig.53

NOTICE: Do not wash the blades in water. Doing

so may cause rust or damage to the tool.

NOTICE: Dirt and corrosion cause excessive

blade friction and shorten the operating time per

battery charge.

Storage

Thehookholeinthetoolbottomisconvenientforhang-

ingthetoolfromanailorscrewonthewall.

Attachthebladecovertotheshearbladessothatthe

bladesarenotexposed.Storethetooloutofthereach

ofchildren.Storethetoolinaplacenotexposedto

moisture or rain.

►Fig.54: 1. Hole

►Fig.55: 1. Hole

OPTIONAL

ACCESSORIES

CAUTION: These accessories or attachments

are recommended for use with your Makita tool

specied in this manual.Theuseofanyother

accessoriesorattachmentsmightpresentariskof

injurytopersons.Onlyuseaccessoryorattachment

foritsstatedpurpose.

Ifyouneedanyassistanceformoredetailsregard-

ingtheseaccessories,askyourlocalMakitaService

Center.

• Shearbladeassembly(forgrassshearuse)

• Shearbladecover(forgrassshearuse)

• Grassreceiver(forgrassshearuse)

• Longhandleattachment(forgrassshearuse)

• Shearbladeassembly(forhedgetrimmeruse)

• Shearbladecover(forhedgetrimmeruse)

• Chipreceiver(forhedgetrimmeruse)

• Storagecase

• Makitagenuinebatteryandcharger

NOTE:Someitemsinthelistmaybeincludedinthe

toolpackageasstandardaccessories.Theymay

differfromcountrytocountry.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita UM600D in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 16,83 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita UM600D Manual

Product: