Manual Makita UM600D (page 15 of 108) (English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish)

690687

Zoom out

Zoom in

1/108

15 ENGLISH

NOTICE: Do not pull the switch trigger forcibly

without pressing the lock-off button.Theswitch

maybreak.

►Fig.3: 1. Switch trigger 2.Lock-offbutton

Tostartthetool,depressthelock-offbuttonandpullthe

switchtrigger.Releasetheswitchtriggertostop.The

lock-offbuttoncanbepressedfromeithertherightor

leftside.

Indicator lamp

Theindicatorlampblinksorlightsupwhentheremain-

ingbatterycapacityisloworempty.Theindicatorlamp

alsolightsupwhenthetoolbecomesoverloaded.

►Fig.4: 1. Indicator lamp

Lamp status and action to be taken

Indicator lamp Status Actiontobetaken

Thelampblinks

red.

Theremaining

batterycapacity

is low.

Chargethebattery.

Thelamplightsup

red. *

Thetoolhas

stoppedbecause

the remaining

batterycapacityis

empty.

Chargethebattery.

Thetoolhas

stopped due to

overload.

Turnoffthetool.

*Thetimeatwhichtheindicatorlamplightsupvariesdepending

onthetemperaturearoundtheworkareaandthebatterycar-

tridge conditions.

Adjusting the shearing height (for

grass shear)

CAUTION: When changing the shearing

height, be sure to attach the blade cover and be

careful not to trap ngers between the tool and

grass receiver.

Theshearingheightcanbesettothreelevels(15mm,

20mm,and25mm)bychangingthexedpositionof

thegrassreceiver.Theshearingheightwithoutthe

grassreceiverisabout10mm.

1. Slidethegrassreceivertowardthefrontofthe

tool.

►Fig.5: 1. Grass receiver

2. Changethexedpositionofthegrassreceiverby

movingitinthedirectionofthearrow.

►Fig.6

NOTE:Theshearingheightvalueisaguideline.The

actual shearing height may vary depending on the

conditionofthelawnortheground.

NOTE:Tryatestshearinginalessconspicuous

place to get your desired height.

ASSEMBLY

CAUTION: Always be sure that the tool is

switched off and the battery cartridge is removed

before carrying out any work on the tool.

CAUTION: When replacing the shear blades,

always wear gloves and attach the blade cover so

that your hands and face do not directly contact

the blades.

NOTICE: When replacing the shear blades, do

not wipe off grease from the gear and crank.

Installing or removing the blade

cover

CAUTION: Be careful not to touch the blades

when installing or removing the blade cover.

Toremovethebladecover,pullitslightly,andthenslide

itsideways.Toinstallthebladecover,performthesteps

in reverse.

►Fig.7

Installing or removing the grass

receiver

CAUTION: When installing or removing the

grass receiver, be sure to attach the blade cover

and be careful not to trap your ngers between

the tool and grass receiver.

Removing the grass receiver

1. Release the protrusions on the grass receiver

fromthegroovesonthetoolwhileslidingthegrass

receivertowardthefrontofthetool.

►Fig.8: 1. Grass receiver

2. Releasethehingeofthegrassreceiverfromthe

tool.

Installing the grass receiver

1. Hookthehingeofthegrassreceiveronthegroove

ofthetool.

►Fig.9: 1. Hinge 2. Grass receiver

2. Aligntheprotrusionsonthegrassreceiverwith

thegroovesonthetoolbyslidingthegrassreceiver

towardthefrontofthetoolandmovingitinthedirection

ofthearrow.

►Fig.10

NOTICE: Do not attach the hinge of the grass

receiver to the tool forcibly after aligning the pro-

trusions on the grass receiver with the grooves

on the tool.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita UM600D in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 16,83 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita UM600D Manual

Product: