Manual Makita TD 021D (page 6 of 40) (English, German, Dutch, Danish, French, Italian, Portuguese, Spanish)

448659

Zoom out

Zoom in

1/40

NOTE:

• Use the proper bit for the head of the screw/bolt that

you wish to use.

• Hold the tool pointed straight at the screw.

• If you tighten the screw for a time longer than shown in

the figures, the screw or the point of the driver bit may

be overstressed, stripped, damaged, etc. Before start-

ing your job, always perform a test operation to deter-

mine the proper fastening time for your screw.

The fastening torque is affected by a wide variety of fac-

tors including the following. After fastening, always check

the torque with a torque wrench.

1. When the battery cartridge is discharged almost

completely, voltage will drop and the fastening

torque will be reduced.

2. Driver bit or socket bit

Failure to use the correct size driver bit or socket bit

will cause a reduction in the fastening torque.

3. Bolt

• Even though the torque coefficient and the class of

bolt are the same, the proper fastening torque will

differ according to the diameter of bolt.

• Even though the diameters of bolts are the same,

the proper fastening torque will differ according to

the torque coefficient, the class of bolt and the bolt

length.

4. The manner of holding the tool or the material of

driving position to be fastened will affect the torque.

Using the tool as a hand screwdriver (Fig. 12)

Switch off the tool.

Move the lock lever to the locked position .

Turn the tool.

NOTE:

• Use the tool with a fastening torque less than 12.5 Nm.

• This use is convenient for checking the screwdriving.

• Do not use the tool for work requiring excessive force,

such as tightening bolt M10 or bolts greater than M10

or removing rusted screws.

MAINTENANCE

CAUTION:

• Always be sure that the tool is switched off and the bat-

tery cartridge is removed before attempting to perform

inspection or maintenance.

To maintain product SAFETY and RELIABILITY, repairs,

any other maintenance or adjustment should be per-

formed by Makita Authorized Service Centers, always

using Makita replacement parts.

ACCESSORIES

CAUTION:

• These accessories or attachments are recommended

for use with your Makita tool specified in this manual.

The use of any other accessories or attachments might

present a risk of injury to persons. Only use accessory

or attachment for its stated purpose.

If you need any assistance for more details regarding

these accessories, ask your local Makita service center.

• Phillips bit

• Socket bit

• Soft carrying case

• Bit piece

• Makita genuine batteries and chargers

ENG102-3

For European countries only

Noise

The typical A-weighted noise level determined according

to EN60745:

Sound pressure level (

): 83 dB (A)

Sound power level (

): 94 dB (A)

Uncertainty (K): 3 dB (A)

Wear ear protection

ENG205-2

Vaibration

The vibration total value (tri-axial vector sum) determined

according to EN60745:

Work mode: impact tightening of fasteners of the

maximum capacity of the tool

Vibration emission (a

): 6.5 m/s

Uncertainty (K): 1.5 m/s

ENG901-1

• The declared vibration emission value has been measured

in accordance with the standard test method and may be

used for comparing one tool with another.

• The declared vibration emission value may also be used in

a preliminary assessment of exposure.

WARNING:

• The vibration emission during actual use of the power tool

can differ from the declared emission value depending on

the ways in which the tool is used.

• Be sure to identify safety measures to protect the operator

that are based on an estimation of exposure in the actual

conditions of use (taking account of all parts of the operat-

ing cycle such as the times when the tool is switched off

and when it is running idle in addition to the trigger time).

ENH101-13

For European countries only

EC Declaration of Conformity

We Makita Corporation as the responsible manufacturer

declare that the following Makita machine(s):

Designation of Machine: Cordless Impact Driver

Model No./ Type: TD021D

are of series production and

Conforms to the following European Directives:

98/37/EC until 28th December 2009 and then with 2006/

42/EC from 29th December 2009

And are manufactured in accordance with the following stan-

dards or standardised documents:

EN60745

The technical documentation is kept by our authorized repre-

sentative in Europe who is:

Makita International Europe Ltd.

Michigan Drive, Tongwell,

Milton Keynes, MK15 8JD, England

19th March 2009

Tomoyasu Kato

Director

Makita Corporation

3-11-8, Sumiyoshi-cho,

Anjo, Aichi, JAPAN

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita TD 021D in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,14 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita TD 021D Manual

Product: