Manual Makita SC 190DW (page 11 of 76) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

448644

Zoom out

Zoom in

1/76

MAINTENANCE

CAUTION:

Always be sure that the tool is switched off and the

battery cartridge is removed before carrying out any

work on the tool.

Oil replenishment (Fig. 16)

This cordless rod cutter is electrohydraulic. When

shipped from the factory, it was filled with the oil. Do

not attempt to add oil as long as the tool performs

well. When the oil-pressure is not enough to cut steel

rods, replenish the oil as follows. Use only Genuine

Makita Hydraulic Oil #46.

1. Place the steel rod between the cutters and pull

the trigger.

2. Release the trigger just before cut-off is com-

pleted to stop the tool.

3. Remove the battery cartridge from the tool.

4. Remove the hex bolt which caps the oil hole.

Replenish oil, being careful not to allow any oil into

the motor.

5. Replace the hex bolt and tighten securely.

6. Install the battery cartridge on the tool and com-

plete cut-off of the steel rod.

7. Repeat the above procedures several times.

To maintain product safety and reliability, repairs,

maintenance or adjustment should be carried out by

Makita Authorized Service Center.

SC130DRA/SC160DRA/SC190DW (E) (’100. 1. 13)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita SC 190DW in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,38 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Makita SC 190DW

Makita SC 190DW User Manual - English, Dutch - 16 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita SC 190DW Manual

Product: