691393

Makita PO5000C Manual

7
Zoom out
Zoom in
Previous page
1/52
Next page
7 ENGLISH
Installing or removing pad
Optional accessory
CAUTION: Only use hook-and-loop system
pads for polishing.
►Fig.8: 1. Pad
Toinstallthepad,rstremovealldirtandforeignmat-
terfromthehook-and-loopsystemofthepadandthe
backingpad.Attachthepadtothebackingpadsothat
their edges are aligned.
Toremovethepadfromthebackingpad,justpullup
fromitsedge.
CAUTION: Make sure that the pad and
backing pad are aligned and securely attached.
Otherwisethepadwillcauseaexcessivevibration
whichmaycauselossofcontrolorthepadmaybe
thrownoutfromthetool.
OPERATION
CAUTION: Only use Makita genuine pads for
polishing.
CAUTION: Make sure the work material is
secured and stable. Falling object may cause
personal injury.
CAUTION:
Hold the tool rmly with one hand
on the switch handle and the other hand on the
front grip (or side handle) when performing the tool.
CAUTION: Do not run the tool at high load
over an extended time period.Itmayresultintool
malfunctionwhichcauseselectricshock,reand/or
seriousinjury.
CAUTION:
Be careful not to touch the rotating part.
NOTICE: Never force the tool. Excessivepressure
mayleadtodecreasedpolishingefciency,damaged
pad,orshortentoollife.
NOTICE: Continuous operation at high speed
may damage work surface.
Polishing operation
►Fig.9
1. Surfacetreatment(Randomorbitwithforced
rotationmode)
Useawoolpadforroughnishingthenuseasponge
padfornenishing.
2. Applyingwax(Randomorbitmode)
Useaspongepad.Applywaxtothespongepadorwork
surface.Runthetoolatlowspeedtosmoothoutwax.
CAUTION: Do not apply excessive wax or
polishing agent.Itwillgeneratemoredustandmay
causeeyeorrespiratorydiseases.
NOTE:
First,performatestwaxingonaninconspicuous
portionoftheworksurface.Makesurethatthetoolwill
notscratchthesurfaceorresultinunevenwaxingbefore.
3. Removingwax(Randomorbitmode)
Useanotherspongepad.Runthetooltoremovewax.
4. Polishing(Randomorbitmode)
Applyafeltpadgentlytotheworksurface.
MAINTENANCE
CAUTION: Always be sure that the tool is
switched off and unplugged before attempting to
perform inspection or maintenance.
NOTICE: Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
Cleaning dust covers
►Fig.10: 1.Dustcover
Regularlycleanthedustcoversontheinhalationvents
forsmoothaircirculation.Removethedustcoversand
clean the mesh.
TomaintainproductSAFETYandRELIABILITY,repairs,
carbonbrushinspectionandreplacement,anyother
maintenanceoradjustmentshouldbeperformedby
MakitaAuthorizedorFactoryServiceCenters,always
usingMakitareplacementparts.
OPTIONAL
ACCESSORIES
CAUTION: These accessories or attachments
are recommended for use with your Makita tool
specied in this manual.Theuseofanyother
accessoriesorattachmentsmightpresentariskof
injurytopersons.Onlyuseaccessoryorattachment
foritsstatedpurpose.
Ifyouneedanyassistanceformoredetailsregard-
ingtheseaccessories,askyourlocalMakitaService
Center.
• Sidegrip
• Backingpad
• Woolpad
• Spongepad
• Feltpad
NOTE:Someitemsinthelistmaybeincludedinthe
toolpackageasstandardaccessories.Theymay
differfromcountrytocountry.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita PO5000C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita PO5000C in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 9,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info