Manual Makita PO5000C (page 6 of 52) (English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish)

691393

Zoom out

Zoom in

1/52

6 ENGLISH

FUNCTIONAL

DESCRIPTION

CAUTION: Always be sure that the tool is

switched off and unplugged before adjusting or

checking function on the tool.

Switch action

CAUTION: Before plugging in the tool, always

check to see that the switch trigger actuates

properly and returns to the "OFF" position when

released.

►Fig.1: 1. Switch trigger 2.Lockbutton

Tostartthetool,simplypulltheswitchtrigger.The

rotationspeedwillincreaseasyoupullthetrigger.

Releasetheswitchtriggertostop.Forcontinuousoper-

ation,pulltheswitchtrigger,pushinthelockbuttonand

thenreleasetheswitchtrigger.Tostopthetoolfromthe

lockedposition,pullthetriggerfully,thenreleaseit.

CAUTION: Switch can be locked in "ON" posi-

tion for ease of operator comfort during extended

use. Apply caution when locking tool in "ON"

position and maintain rm grasp on tool.

CAUTION:

Do not plug in the tool with the

lock-on switch engaged.Thetoolwillberununsup-

portedanditmaycauseapersonalinjuryorbreakage.

Speed adjusting dial

►Fig.2: 1.Speedadjustingdial

Therotatingspeedcanbechangedbyturningthe

speedadjustingdialtoagivennumbersettingfrom1to

5.Higherspeedisobtainedwhenthedialisturnedin

thedirectionofnumber5.Andlowerspeedisobtained

whenitisturnedinthedirectionofnumber1.

Refertothetablefortherelationshipbetweenthenum-

bersettingsonthedialandtheapproximaterotating

speed.

Number Orbits per min. Pad rotating

speed per minute

in random orbit

with forced rota-

tion mode

1 1,600 180

2 2,500 290

3 3,700 430

4 5,300 610

5 6,800 780

NOTICE: If the tool is operated continuously

at low speeds for a long time, the motor will get

overloaded, resulting in tool malfunction.

NOTICE:

The speed adjusting dial can be turned

only as far as 5 and back to 1. Do not force it past 5 or

1, or the speed adjusting function may no longer work.

Electronic function

Thetoolsequippedwithelectronicfunctionareeasyto

operatebecauseofthefollowingfeatures.

Constant speed control

Possibletogetnenish,becausetherotatingspeedis

keptconstantevenundertheloadedcondition.

Soft start feature

Softstartbecauseofsuppressedstartingshock.

Selecting the action mode

Turnthechangeknobtoaltertherotationmode.

►Fig.3: 1.Changeknob

NOTICE:

Always turn the knob fully. If the knob is

in the middle position, you can not turn on the tool.

NOTICE: You can not change the action mode

when the tool is switched on.

Random orbit with forced rotation

mode

►Fig.4

Randomorbitwithforcedrotationmodeisorbitalactionwithforced

rotationofthepadforroughpolishingsuchassurfacetreatment.

Rotatethechangeknobcounterclockwiseforrandom

orbitwithforcedrotationmode.

Random orbit mode

►Fig.5

Randomorbitmodeisorbitalactionwithfreerotationof

thepadfornepolishing.

Rotatethechangeknobclockwiseforrandomorbitmode.

ASSEMBLY

CAUTION:

Always be sure that the tool is switched

off and unplugged before carrying out any work on the tool.

Installing the backing pad

►Fig.6: 1.Backingpad2.Hexwrench

Putthebackingpadontheshaftthenturnthebolt

clockwisewithahexwrench.

CAUTION: Make sure that the backing pad is

secured properly.Looseattachmentwillrunoutof

balanceandcauseaexcessivevibrationwhichmay

causelossofcontrol.

Installing side grip

Optional accessory

►Fig.7: 1.Cap2. Side grip

Removethecapandscrewthesidegriponthetoolsecurely.

Thesidegripcanbeinstalledoneithersideofthetool.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita PO5000C in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 9,24 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita PO5000C Manual

Product: