Manual Makita M1901 (page 9 of 56) (English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish)

691528

Zoom out

Zoom in

1/56

9 ENGLISH

►Fig.14: 1. Screw 2. Edge fence

Whenplaning,movethetoolwiththeedgefenceush

with the side of the workpiece. Otherwise uneven plan-

ing may result.

►Fig.15

Maximumshiplapping(rabbeting)depthis9mm

(11/32″).

Youmaywishtoaddtothelengthofthefenceby

attachinganextrapieceofwood.Convenientholes

are provided in the fence for this purpose, and also for

attachinganextensionguide(optionalaccessory).

►Fig.16

NOTE: The shape of the guide rule is differ from

country to country. In some country, the guide rule is

not included as a standard accessory.

Chamfering

►Fig.17

►Fig.18

Tomakeachamferingcutasshowninthegure,align

the"V"grooveinthefrontbasewiththeedgeofthe

workpiece and plane it.

MAINTENANCE

CAUTION: Always be sure that the tool is

switched off and unplugged before attempting to

perform inspection or maintenance.

CAUTION: Never use gasoline, benzine, thin-

ner, alcohol or the like. Discoloration, deformation

or cracks may result.

Sharpening the planer blades

For conventional planer blades only

Alwayskeepyourplanerbladessharpforthebestper-

formancepossible.Usethesharpeningholder(optional

accessory)toremovenicksandproduceaneedge.

►Fig.19: 1. Sharpening holder

First, loosen the two wing nuts on the holder and insert

theplanerblades(A)and(B),sothattheycontactthe

sides(C)and(D).Thentightenthewingnuts.

►Fig.20: 1. Wing nut 2.Planerblade(A)3. Planer

blade(B)4. Side (D) 5.Side(C)

Immerse the dressing stone in water for 2 or 3 minutes

beforesharpening.Holdtheholdersothattheboth

bladescontactthedressingstoneforsimultaneous

sharpening at the same angle.

►Fig.21

Replacing carbon brushes

►Fig.22: 1. Limit mark

Removeandcheckthecarbonbrushesregularly.

Replace when they wear down to the limit mark. Keep

thecarbonbrushescleanandfreetoslipintheholders.

Bothcarbonbrushesshouldbereplacedatthesame

time.Useonlyidenticalcarbonbrushes.

Use a screwdriver to remove the chip cover or nozzle.

►Fig.23: 1.ChipcoverorNozzle2. Screwdriver

Useascrewdrivertoremovethebrushholdercaps.

Takeouttheworncarbonbrushes,insertthenewones

andsecurethebrushholdercaps.

►Fig.24: 1. Brush holder cap 2. Screwdriver

To maintain product SAFETY and RELIABILITY,

repairs,anyothermaintenanceoradjustmentshould

beperformedbyMakitaAuthorizedorFactoryService

Centers,alwaysusingMakitareplacementparts.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita M1901 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 7,86 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita M1901 Manual

Product: