Manual Makita M1901 (page 6 of 56) (English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish)

691528

Zoom out

Zoom in

1/56

6 ENGLISH

General power tool safety warnings

WARNING: Read all safety warnings and

all instructions. Failure to follow the warnings and

instructionsmayresultinelectricshock,reand/or

seriousinjury.

Save all warnings and instruc-

tions for future reference.

The term "power tool" in the warnings refers to your

mains-operated(corded)powertoolorbattery-operated

(cordless) power tool.

Planer safety warnings

1. Wait for the cutter to stop before setting the

tool down.Anexposedrotatingcuttermay

engagethesurfaceleadingtopossiblelossof

controlandseriousinjury.

2. Hold the power tool by insulated gripping

surfaces only, because the cutter may contact

its own cord.Cuttinga"live"wiremaymake

exposedmetalpartsofthepowertool"live"and

could give the operator an electric shock.

3. Use clamps or another practical way to secure

and support the workpiece to a stable plat-

form.Holdingtheworkbyyourhandoragainst

thebodyleavesitunstableandmayleadtolossof

control.

4. Rags, cloth, cord, string and the like should

never be left around the work area.

5. Avoid cutting nails. Inspect for and remove all

nails from the workpiece before operation.

6. Use only sharp blades. Handle the blades very

carefully.

7. Be sure the blade installation bolts are

securely tightened before operation.

8. Hold the tool rmly with both hands.

9. Keep hands away from rotating parts.

10. Before using the tool on an actual workpiece,

let it run for a while. Watch for vibration or

wobbling that could indicate poor installation

or a poorly balanced blade.

11. Make sure the blade is not contacting the

workpiece before the switch is turned on.

12. Wait until the blade attains full speed before

cutting.

13. Always switch off and wait for the blades to

come to a complete stop before any adjusting.

14. Never stick your nger into the chip chute.

Chute may jam when cutting damp wood.

Clean out chips with a stick.

15. Do not leave the tool running. Operate the tool

only when hand-held.

16. Always change both blades or covers on the

drum, otherwise the resulting imbalance will

cause vibration and shorten tool life.

17. Use only Makita blades specied in this

manual.

18. Always use the correct dust mask/respirator

for the material and application you are work-

ing with.

SAVE THESE INSTRUCTIONS.

WARNING: DO NOT let comfort or familiarity

with product (gained from repeated use) replace

strict adherence to safety rules for the subject

product. MISUSE or failure to follow the safety

rules stated in this instruction manual may cause

serious personal injury.

FUNCTIONAL

DESCRIPTION

CAUTION: Always be sure that the tool is

switched off and unplugged before adjusting or

checking function on the tool.

Adjusting depth of cut

►

Fig.1: 1. Pointer 2.Knob

Depthofcutmaybeadjustedbysimplyturningtheknobonthe

front of the tool so that the pointer points the desired depth of cut.

Switch action

►Fig.2: 1. Switch trigger 2.LockbuttonorLock-offbutton

CAUTION: Before plugging in the tool, always

check to see that the switch trigger actuates

properly and returns to the "OFF" position when

released.

For tool with lock button

CAUTION: Switch can be locked in "ON" posi-

tion for ease of operator comfort during extended

use. Apply caution when locking tool in "ON"

position and maintain rm grasp on tool.

To start the tool, simply pull the switch trigger. Release the switch

trigger to stop.

For continuous operation, pull the switch trigger and then push in

thelockbutton.

To stop the tool from the locked position, pull the switch trigger

fully, then release it.

For tool with lock-off button

Topreventtheswitchtriggerfrombeingaccidentallypulled,a

lock-offbuttonisprovided.

Tostartthetool,depressthelock-offbuttonandpulltheswitch

trigger. Release the switch trigger to stop.

CAUTION: Do not pull the switch trigger hard

without depressing the lock-off button. This can

causeswitchbreakage.

Foot

►Fig.3: 1.Planerblade2.Rearbase3. Foot

Afteracuttingoperation,raisethebacksideofthetoolsothat

thefootcomesoutoftherearbase.Thispreventstheplaner

bladestobedamaged.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita M1901 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 7,86 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita M1901 Manual

Product: