448567

Makita JS 1660 Manual

5
Zoom out
Zoom in
Previous page
1/7
Next page
Switch action (Fig. 4)
CAUTION:
Before plugging in the tool, always check to see that
the slide switch actuates properly and returns to the
‘‘OFF’’ position when depressed.
To start the tool, move the slide switch forward, and
the slide switch will lock in the ‘‘ON’’ position. To stop,
lightly depress the rear of the slide switch, and it will
return to the ‘‘OFF’’ position.
Operation (Fig.5&6)
Turn the tool on and set front ends of the side blades
on the workpiece. Now simply move the tool forward,
keeping the side blades flush with the workpiece
surface.
CAUTION:
When cutting a small portion of the workpiece, you
may have difficulty completing the end of the cut. In
that case, try to cut it again, pulling the workpiece
back slightly.
MAINTENANCE
CAUTION:
Always be sure that the tool is switched off and
unplugged before carrying out any work on the tool.
Replacement of carbon brushes (Fig.7&8)
Replace carbon brushes when they are worn down to
the limit mark. Both identical carbon brushes should
be replaced at the same time.
Replacing blades
The service life of the blades varies in terms of the
workpiece to be cut. The following reference tables
indicate the approximate service life of the blades.
When the blades become dull, ask Makita Authorized
or Factory Service Centers to replace the blades.
For JS1660
Max.cutting capacities mm ga
Steel up to 400 N/mm
2
1.6 16
Steel up to 600 N/mm
2
1.2 18
Steel up to 800 N/mm
2
0.8 22
Aluminum up to 200 N/mm
2
2.5 13
For JS1670
Max.cutting capacities mm ga
Steel up to 400 N/mm
2
1.0 20
Steel up to 600 N/mm
2
0.7 23
Steel up to 800 N/mm
2
0.5 26
Aluminum up to 200 N/mm
2
2.5 13
To maintain product safety and reliability, repairs,
maintenance or adjustment should be carried out by a
Makita Authorized Service Center.
JS1660/JS1670 (E) (’101. 1. 12)
5
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita JS 1660 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita JS 1660 in the language / languages: English, Dutch as an attachment in your email.

The manual is 0,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Makita JS 1660

Makita JS 1660 User Manual - English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info