793651
15
Zoom out
Zoom in
Previous page
1/156
Next page
15 ENGLISH
Overdischarge protection


when the switches are operated, remove the batteries
from the tool and charge the batteries.
Protections against other causes

that could damage the tool and allows the tool to stop


halt or stop in operation.
 󰀨
restart.
 

 


Indicating the remaining battery
capacity
-

light up for a few seconds.
Fig.8: 1. Indicator lamps 2. Check button
Indicator lamps Remaining
capacity
Lighted 󰀨 Blinking
75% to 100%
50% to 75%
25% to 50%
0% to 25%
Charge the



malfunctioned.
NOTE: Depending on the conditions of use and the
󰀨

NOTE:

Switch action
WARNING: Before installing the battery car-
tridge into the tool, always check to see that the
switch trigger actuates properly and returns to
the "OFF" position when released.
WARNING: 󰀨
by taping down or some other means. A switch with
󰀨

WARNING: NEVER use the tool if it runs when
you simply pull the switch trigger without press-
󰀨 A switch in need of repair


for proper repairs BEFORE further usage.

󰀨
󰀨
Release the switch trigger to stop.
Fig.9: 1. Switch trigger 2.󰀨
NOTICE: Do not pull the switch trigger hard
󰀨 This can
cause switch breakage.
CAUTION: The tool starts to brake the cir-
cular saw blade rotation immediately after you

respond the reaction of the brake when releasing
the switch trigger. Sudden reaction can drop the tool
󰀨
Adjusting depth of cut
CAUTION: After adjusting the depth of cut,
always tighten the lever securely.
Loosen the lever on the depth guide and move the base
up or down. At the desired depth of cut, secure the base

For cleaner, safer cuts, set cut depth so that no more

proper cut depth helps to reduce potential for danger-

Fig.10: 1. Lever
NOTICE: If the base doesn't slide up or down



Bevel cutting
CAUTION: After adjusting the bevel angle,
always tighten the clamping screws securely.
Loosen the clamping screws. Set for the desired angle


Fig.11: 1. Clamping screw
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita HS011G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita HS011G in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 22.49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info