599737
30
Zoom out
Zoom in
Previous page
1/45
Next page
28
8-7 BRUSH
The brushes must be smooth where they
contact the slip rings. If not, polish smooth
the brushes with sandpaper. A brush that is
not smooth produces arcs between the brush
and slip ring leading to possible damage.
Usable brush lengths are from 5 mm to 15
mm (0.2 " to 0.6").
A brush shorter than 5 mm must be replaced
because decreased contact pressure
between the brush and slip ring lowers gen-
erator efficiency and output voltage.
15 to 5 mm
(0.6" to 0.2")
BRUSH
BRUSH
HOLDER
8-8 A.V.R
(AUTOMATIC VOLTAGE REGULATOR)
1) Features
This AVR operates to control the field current
in order to maintain the output voltage for the
AC current, which generated by the magnetic
flux by the field coil.
2) A.V.R. trouble may be identified by simply
looking at the A.V.R., or by the inter-lead
resistance with a tester, or actually mount-
ing it in the generator and operating it.
2 4
1 3
Terminal number
of the A.V.R.
Yellow
(a) A.V.R. TROUBLE IDENTIFICATION by APPEARANCE
If an A.V.R. electronic part is burnt dark, or the surface epoxy resin melted, it often indi-
cates A.V.R. trouble.
(b) IDENTIFYING A.V.R. TROUBLE by CHECKING INTER-LEAD RESISTANCE
Check the inter-lead resistance of the A.V.R. with a tester, referring to the following table.
If the tester readings very greatly from the values specified in the table on next page, the
A.V.R. is faulty.
NOTE : Take teater inaccuracy into account in reading the tester.
(c) IDENTIFYING A.V.R. TROUBLE by MOUNTING and OPERATING in THE GENERATOR
SCR or transistor damage cannot be detected by simply looking at the A.V.R. or checking
the lead resistance. Check it by mounting the suspectedly faulty A.V.R. in a normal gener-
ator, or mount a mormal A.V.R. in a generator which fails to generate voltage.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Makita G12000R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Makita G12000R in the language / languages: English as an attachment in your email.

The manual is 1,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info