Manual Makita G12000R (page 27 of 45) (English)

599737

Zoom out

Zoom in

1/45

8. CHECKING FUNCTIONAL MEMBERS

PILOT LAMP

8-2 AC RECEPTACLES

Using a circuit tester, check continuity

between the two terminals at the rear of the

AC receptacles while the receptacle is

mounted on the control panel. When continu-

ity is found between the output terminals of

the receptacle with a wire connected across

these terminals, the AC receptacle is normal.

When the wire is removed and no continuity

is found between these terminals, the recep-

tacles are also normal.

8-1 PILOT LAMP and VOLTMETER

Check the pilot lamp and the voltmeter if it is

turned on by applying specific voltage.

Pilot lamp and voltmeter cannot be checked

with circuit tester because its resistance is

too large.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Makita G12000R in the language / languages: English as an attachment in your email.

The manual is 1,4 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Makita G12000R Manual

Product: